20 Most Recent
Danby MaitreD 6-Bottle Wine Cooler - Page 9 Questions & Answers
Tempur-pedic Ergo Premier not lifting
I hat the same problem with my Ergo Premier remote... I called the customer service at Tempurpedic, and the lady told me to push de FLAT button and hold it for 35 seconds. As simple as that.
It is soon written RST on the screen... and it flashes...
After 35 seconds, you can release it. The RST will disappear.
And then it worked for me... The remote was functioning!
2/2/2023 11:17:45 PM •
Furniture
•
Answered
on Feb 02, 2023
How do you replace a B03F4666 Temperature Control board for the AW-320ED wine cooler? I received the part and the instruction but the instruction is not accurate and does not work
To replace the B03F4666 Temperature Control board for the AW-320ED wine cooler, follow these steps:
Unplug the wine cooler and locate the control board inside the wine cooler.
Remove the screws or connectors that secure the old control board in place.
Disconnect the wires from the old control board.
Connect the wires to the new control board in the same configuration as the old control board.
Secure the new control board in place with screws or connectors.
Plug in the wine cooler and test the temperature control to ensure it is working properly; https://kitchencol.com/edgestar-wine-cooler-lights-blinking/
If the instruction manual you received is not accurate, you can try finding a video tutorial online or reaching out to the manufacturer for clarification on the replacement process.
2/2/2023 10:22:28 AM •
Furniture
•
Answered
on Feb 02, 2023
Broyhill attic heirloom computer armoire how to move middle shelf
Moving the middle shelf on a Broyhill Attic Heirloom computer armoire may vary depending on the specific model. Here are some general steps you can try to move the middle shelf:
- First, empty the shelf and any items that may be on top of it.
- Locate any locking or adjustment mechanisms that may be holding the shelf in place. These mechanisms may include pins, levers, or knobs. Depending on the model, the locking mechanism may be located on the side, back or bottom of the shelf.
- Once you have located the locking mechanism, release it by turning, sliding or pressing the lever.
- Carefully lift the shelf out of the armoire and move it to the desired position.
- Re-engage the locking mechanism to secure the shelf in place.
- If you are having trouble locating the locking mechanism or if the instructions on your armoire are not clear, you may want to check the manual that came with the armoire or contact Broyhill customer support for assistance.
It is important to be careful when moving the shelves to avoid damaging the armoire or injuring yourself. If you feel unsure about doing this, it is best to contact a professional or Broyhill customer support for assistance.
1/22/2023 3:45:44 PM •
Furniture
•
Answered
on Jan 22, 2023
How do I repair my fjords electric swing recliner. reclines fine but makes a terrible clicking sound when it returns to normal rest position. This is only 2 years old
A clicking sound when a recliner returns to its normal rest position can be caused by a variety of issues, including worn gears or loose parts. To repair the issue with your Fjords electric swing recliner, you can try the following steps:
- Check for any visible damage or loose parts. Tighten any loose screws or bolts and secure any parts that may have come loose.
- Locate and clean the gears. If the gears are dirty or have debris in them, the clicking sound may be caused by the gears not meshing properly. Clean the gears with a small brush and lubricate them with light oil.
- Check the recliner's motor. If the motor is not functioning properly, it may cause a clicking sound as the recliner returns to its resting position. If the motor is faulty, you may need to have it replaced.
- Check the recliner's transformer. The transformer is responsible for converting the voltage and can cause the clicking sound if not working properly. If this is the case, you may need to have the transformer replaced.
If you are not comfortable with these steps, or if the issue persists after trying them, it may be best to contact Fjords customer support or a professional technician for further assistance. They may ask you to provide your chair's serial number and other information to help troubleshoot the problem.
1/22/2023 3:40:36 PM •
Furniture
•
Answered
on Jan 22, 2023
Error code 04,14 for a ogawa 5020 massage chair
Error code 04,14 on an Ogawa 5020 massage chair typically indicates a problem with the chair's main control board. Some possible causes of this error code include a malfunctioning sensor, a software issue, or a problem with the power supply.
To fix this error, you should first try resetting the chair by unplugging it from the power outlet and then plugging it back in. If the error persists, you may want to contact Ogawa customer support for further assistance. They may ask you to provide your chair's serial number and other information to help troubleshoot the problem.
It's also possible that the error is caused by a hardware malfunction and may require a technician to repair or replace a component. In this case, Ogawa customer service may be able to connect you with a technician in your area or advise you on next steps.
1/22/2023 3:38:16 PM •
Furniture
•
Answered
on Jan 22, 2023
My mom's lift chair worked and then when she moved back to it, it doesn't.
Try going back to basics. You might need to tip the whole chair on it's side to access the parts inside the chair.
You've checked for power,Yes. You've listened for the motor, Yes. Now move to where the motor connects to the rise and fall mechanism. Work the motor and listen to where it connects to the rails that lift/lower the chair. Is it making strange noises? Clicks, Rattles, buzzing? Is it heating up? Are the rails trying to move but slipping back as the motor spins?
Some chairs only use One motor, others use Two so check both if there is two fitted.
Comment below with more information and I'll see what help i can give you.
12/19/2022 8:08:09 AM •
Furniture
•
Answered
on Dec 19, 2022
What is a straddle bet?
In limit Hold'em and otherflop games players are frequently allowed to make a bet called a straddle bet.The player who follows the big blind and would normally be under the gun canraise before cards before cards are dealt. Players that act after him must callthe raise, fold, or raise the bet themselves. The straddler's raise is live -if no-one else raises, he has the option to reraise after the blinds haveacted.
12/12/2022 8:17:24 AM •
Furniture
•
Answered
on Dec 12, 2022
Not finding what you are looking for?
