20 Most Recent Hoover WindTunnel Air Pro Upright Vacuum, UH72450 Questions & Answers


The brushes are turned by a motor. No belt. It's possible the gears on the brushes have a flat spot on them which would stop them from turning under a load.

Hoover Vacuums | Answered Yesterday


If you can hear the motor running it probably needs a new drive belt and if the motor isn't running there is an electrical fault that must be checked by a suitably experienced person.

Some of the older power scrubbers/polishers I have seen didn't have a belt but used a simple but substantial gear drive system that gave no trouble in my experience.

Hoover Vacuums | Answered on Jan 04, 2021


The part number you provided returns no results by google and doesn't appear in the parts list of the model.

You will have to do more research or provide a long-hand description...

Hoover Vacuums | Answered on Dec 24, 2020


~It appears to be a known issue with that model. Find the leak and fix the crack with JB Weld.

https://www.thriftyfun.com/Hoover-Carpet-Shampooer-Dumping-Water.html

..

Hoover Vacuums | Answered on Dec 22, 2020


Contact Hoover directly to request the wiring diagram.

Hoover Vacuums | Answered on Dec 21, 2020


possible bad switch or motor

Hoover Vacuums | Answered on Dec 19, 2020


check for tank not seated properly. look for air leak at all seals. no water unless clean water tank is correctly seated.

Hoover Vacuums | Answered on Dec 01, 2020


I FIND MANY TIMES THERE IS HAIR WRAPPED AROUND THE END OF THE SHAFT AND WHEN ROTATING IT JUST GETS TIGHTER AND TIGHTER

Hoover Vacuums | Answered on Nov 07, 2020


possible loose hose or fitting or tank leaking

Hoover Vacuums | Answered on Oct 24, 2020


Had it been mains powered I would have said give it at least a fortnight in the airing cupboard with the filters, dust container, etc. removed. The lower voltage of cordless appliances mean there is less potential for moisture-caused short circuits, motor damage, etc.

The trouble with something like a vacuum cleaner is water drawn into the motor and then it is immediately switched off, the interior of the vac becomes an enclosed space. Placing the unit somewhere warm could evaporate the water but because there is little or no throughput of air that trapped moist air simply condenses into air and water droplets when the warmth is removed and overall improvement is minimal.
You could fit the battery and switch on now and there probably would be no damage but if it was mine I would partially dismantle it and give it another couple of days somewhere warm...

Hoover Vacuums | Answered on Sep 20, 2020


With portable tools, domestic appliances, etc. the power cord is the first thing to suspect as internal breaks in the conductors are not unusual (usually occurring close to one end or the other).

The next thing to suspect is the switch...

Hoover Vacuums | Answered on May 16, 2020

Not finding what you are looking for?
Hoover WindTunnel Air Pro Upright Vacuum, UH72450 Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Brad Brown

Level 3 Expert

18562 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hoover Vacuums

  • Hoover Vacuums

Most Popular Question

fuse hoover windtunnel pro air sweeper

  • Vacuums
Loading...