Top 20 Alcatel Tracfone A382 BIG EASY No-Contract Phone Questions & Answers

PUK ( personal user key) codes are only available from your service provider It is a code that makes you sim card inoperable if stolen and cuts in after 3 false attempts at you PIN number call them on another phone provide proof that you own your account and they will give it to you

Reset phone. Start over and write down password this time and store in secret place.

you please contact your sim provider for puk code

Get the pin from your service provider!

Take it to Walmart. if it's a new phone they should have done it for you when you bought it. If you are using a used phone you'll have to set-up a new account. That will require that you buy a new SIM card (sold at Walmart) Last time I looked it was about $25, and you will have to buy time on your new Prepaid account.

Contact your phone service provider, they will be able to help.

post a solution jan for others who may stuggle

With front of phone facing you. On the left side of the phone you will see two grey slim inline buttons, and or, keys. The top button, and or, first key is the UP/DOWN VOLUME key. The bottom button, and or, second key is the LOCK key. (1) To UNLOCK the phone. GOTO the LOCK key. PRESS and HOLD until you see the screen read out display "KEYPAD UNLOCKED". You are now done. (2) To RE-LOCK the phone. GOTO the LOCK key. PRESS and HOLD until you see the screen read out display "KEYPAD LOCKED". You are now done. In Addition: (3) To set AUTO-LOCK on the phone. GOTO the MENU key. Located on the top left of the keypad on the front of the phone. The LARGE WHITE HORIZONTAL BAR directly under the word MENU on the screen readout. PRESS-IT ONCE. You now SEE the PREPAID ICON. Next, locate the OK key, top center on the keypad. Directly below the middle of the screen readout. Next, locate the UP-ARROW key directly above the OK key. By using the OK key PRESS-IT ONCE. Now you see the SETTINGS ICON. Next, by using the OK key, PRESS-IT ONCE. Now you are in SETTINGS. Next, locate the DOWN-ARROW key. Located directly below the OK key. PRESS-IT ONCE. PHONE SETTINGS should now be highlighted for you. Next, by using the OK key, PRESS-IT ONCE. You are now in PHONE SETTINGS. Next, GOTO the UP-ARROW, PRESS-IT ONCE. AUTO KEYPAD LOCK should now be highlighted for you. Next, by using the OK key...(or...by using the WHITE HORIZONTAL BAR key, located directly below the OK on the screen read out). PRESS-IT ONCE. You are now in AUTO KEYPAD LOCK settings. Next, by using the UP or DOWN ARROWS, GOTO the amount of minutes that you would like to set your phone to auto lock for. Next, GOTO the OK key...(or...by using the WHITE HORIZONTAL BAR key, located directly below the screen read out). PRESS-IT ONCE. Your screen read out will now display, "DONE" Your phone is now set to AUTO-LOCK when your phone has been at rest for the amount of minutes that you have selected. If you would like your phone to lock sooner in order to place it in case, pocket, or purse. Simply refer to (2).

https://www.wholesalemarine.com/resources/two-person-towable-tubes-buying-guide/

Lots of ladies share your problem which is not easily overcome, especially if your waist is larger rather than smaller... You really need to try on several costumes to find the best fit and in the lower price ranges you are likely to discover considerable variation between garments of the same theoretical size. This is because the fabric tends to be cut to a tolerance rather than an exact size. If your waist is smaller I suggest you choose a garment that provides the best fit for your hips and bust but if your waist is larger, practically speaking, you will have little choice and will need to buy to suit your waist and either compromise on the bust/hip fit or have a seamstress make a few slight alterations. Good luck!

if the wear ring is installed wrong or the impeller is full of debris this will be the result. look close at the wear ring for scrape marks from the propeller OR are you missing carpet off the rungs of the trailer ?

L stands for limp mode it is a mode that the ECM selects to prevent serious damage to the engine ( from you lack of oil ) have the fault codes read then reset with the scan tool

The first thing to check would be the compression. As long as both cylinders are with in 10 psi of each other you should be okay. Both cylinders need to be at least 100 psi. That would be the minimum for a motor to start and run. It should read aprox- 150 -- 165 psi. Also i would check for a possible exhaust leak, that would cause the motor to bog down because the carb is breathing in the exhaust fumes. Try running the motor with the hood up to see if you have a leak.

Alt. Is bad pull battery's terminal off while car is running if it dies the alt.needs replaced

if water is getting into the engine you have a blown head gasket or cracked head.

I wouldn't put psi any higher and it should run two small homes

this may help? Jandy JVA 1200 or 2400 Pool or Spa Actuator PC Board Replacement Part...

Most likely a fuel line that has failed as a result of modern fuels with high levels of methanol. Given the age of the unit I'd expect that fuel is either leaking from a cracked fuel line or directly from the carburetor because one of the rubber diaphragms has been destroyed by new fuel. PS. never leave fuel in the unit over the winter or for extended periods of time. Try to run it out or drain the tank.

quick google the model number

If you have not moved the crank shaft or cam after the belt was taken off. just put it back on since the timing hasn't changed. If you did move it then it gets dicey because you can bend a valve if you try moving the crankshaft without moving the camshaft too.