20 Most Recent Aiwa CDC-X227 CD Player - Page 4 Questions & Answers

0helpful
1answer

Manual for a XDM17BT AM/FM digital car stereo with Bluetooth trying to get the owners manual download?

To download the manual for the XDM17BT AM/FM digital car stereo with Bluetooth, please visit the Dual website and navigate to the Support page. From there, select the Manuals section and then select the Manuals & Quick Start Guides option. You should then be able to locate the manual for the XDM17BT AM/FM digital car stereo with Bluetooth and download it. XDM17BT https://content.syndigo.com/asset/54aa3970-aefa-43a2-ba0c-150dd12b0e6e/original.pdfDual XDM17BT Manuals ' ManualsLib https://www.manualslib.com/products/Dual-Xdm17bt-11021186.htmlMedia Receiver - XDM17BT - Dual Electronics https://www.dualav.com/product/car/headunits/xdm17bt/
2/15/2023 3:44:04 AM • Car Audio &... • Answered on Feb 15, 2023
0helpful
1answer

My Carrozzeria Avic-Vh09 can't flip up

2/11/2023 4:04:03 PM • Car Audio &... • Answered on Feb 11, 2023
0helpful
3answers

Nhzn-w57(76032) is already locked, How can i use it.

how can i open nhzn-w57
2/6/2023 8:20:53 PM • Car Audio &... • Answered on Feb 06, 2023
0helpful
1answer

Cd boxes in pioneer jukebox not working is there a reset switch ?

is it in a car or not? no model told of juke so how can there be answers"? it needs service for sure, get some?hands on tech in shop.
2/6/2023 11:57:08 AM • Car Audio &... • Answered on Feb 06, 2023
0helpful
1answer

BEOSOUND9000 - When BEO4 is set to 'CD' 'Shift 90258' for test mode, when I then press '72' the message on the BEOSOUND 9000MkIII states 'Wrong SRC/TM' even though It worked at the start of the repair

The message "Wrong SRC/TM" on a BEOSOUND 9000MkIII when pressing '72' while in test mode (Shift 90258) and set to 'CD' could indicate that there is an issue with the source selection or the test mode itself. To resolve this issue, you can try the following steps:
  1. Check the source selection: Make sure that the correct source (CD) is selected on the BEO4 and that it is functioning properly.
  2. Check the test mode: Verify that the test mode has been activated correctly and that the Shift 90258 code has been entered correctly.
  3. Check for firmware updates: Make sure that the firmware on the BEOSOUND 9000MkIII is up-to-date. If there is a firmware update available, install it to resolve any issues with the test mode.
  4. Factory reset: If the above steps do not resolve the issue, a factory reset of the BEOSOUND 9000MkIII may be necessary. This will restore the unit to its original settings and resolve any software-related issues.
If these steps do not resolve the issue, you may need to seek further assistance from the manufacturer or a professional repair service. It's important to follow the manufacturer's instructions and safety guidelines when attempting to repair or troubleshoot your system to avoid damaging the unit or causing potential harm.
1/29/2023 12:39:54 PM • Car Audio &... • Answered on Jan 29, 2023
0helpful
1answer

Lasko silent room heater Model Number 5628

I apologize, but wiring diagrams for specific home appliances are not readily available to the general public. These diagrams are usually confidential and used by authorized repair technicians only. If you need to repair or replace the cord on your Lasko silent room heater Model 5628, I would recommend reaching out to the manufacturer or an authorized repair service for assistance. They should be able to provide you with the information and support you need to safely and effectively repair or replace the cord.
1/29/2023 12:37:57 PM • Car Audio &... • Answered on Jan 29, 2023
0helpful
1answer

Been trying to hook up. Y performance teknique icbm-9707b can't seem to make it work it turns on then off it only makes a wishlsonose

I'm sorry to hear that you're having issues with your Y performance teknique ICBM-9707B. To help diagnose the problem, please provide the following information:
  1. What is the device supposed to do?
  2. What is the exact error message or behavior you are encountering?
  3. Have you tried troubleshooting steps, such as checking the power source or connecting cables?
  4. Is there any recent hardware or software changes made to the device or the environment it is used in?
Providing this information will help me better understand the issue and provide more specific advice to resolve it.
1/29/2023 12:34:38 PM • Car Audio &... • Answered on Jan 29, 2023
0helpful
7answers

Pioneer AVH-P5000DVD stereo USB Error 23

I had the same problem with my Pioneer AVH-P4000DVD. Just got my 16GB sandisk micro cuzer in the mail from Radio Shack. Here is what I did to solve it:
  1. Copied all the files that came with the Sandisk device to another location (in case I need them again)
  2. Copied all the music I had put on the Sandisk since I got it to another location
  3. Using a Windows PC, I right clicked on the drive in Windows Explorer and selected "format"
  4. I re-formatted the cruzer mini to FAT 32, default size (yes, I know it was FAT 32 already)
  5. Copied the music back to the cruzer mini
  6. Plugged it into my radio and it works GREAT! instant access to any track
Before you do this: Reformatting the drive also gets rid of the software that makes the cruzer mini copy files super fast. It will take a lot longer to copy music to the drive. For me this is no big deal as the only reason I bought the drive was to put a bunch of music on it and then leave it in my truck.
1/29/2023 6:06:07 AM • Car Audio &... • Answered on Jan 29, 2023
0helpful
1answer

Face plate on DEH-1700 is loose

Try cleaning the contacts with a q tip and rubbing alcohol and see if that helps.
1/28/2023 9:05:28 PM • Car Audio &... • Answered on Jan 28, 2023
0helpful
1answer

Usb device error for avh-p3200dvd

The USB device error for an AVH-P3200DVD can be caused by a variety of issues, including a problem with the USB device itself, a problem with the USB port on the AVH-P3200DVD, or a problem with the software or firmware on the device. To troubleshoot the issue, you may want to try the following steps:
  1. Check that the USB device is properly formatted and that it contains no corrupt files.
  2. Try connecting a different USB device to the AVH-P3200DVD to see if the problem is with the USB port or the device itself.
  3. Try using a different USB cable to connect the device to the AVH-P3200DVD to see if the cable is the problem.
  4. Check for any software or firmware updates for the AVH-P3200DVD and apply them if necessary.
  5. If none of these steps work, try resetting the AVH-P3200DVD to its factory settings.
If the problem persists, it may be best to contact the manufacturer for further assistance.
1/23/2023 9:47:52 AM • Car Audio &... • Answered on Jan 23, 2023
0helpful
3answers

Need code for siemens vdo 330886636 no 24 469 302

I NEED RADIO CODE FOR SIEMENS VDO 330886636. No.13 138 246. GM020521690276.PLEASE HELP ME.THANKS!
1/19/2023 11:01:52 AM • Car Audio &... • Answered on Jan 19, 2023
0helpful
1answer

Radio code for citroen nemo 59

1/18/2023 8:18:25 AM • Car Audio &... • Answered on Jan 18, 2023
0helpful
1answer

Xtc No power but fuses are good what is the problem?

A possible issue could be a faulty power supply. In order to confirm, you can try plugging the power supply into separate power source to ensure that it is capable of supplying power to the unit. Additionally, the speaker connections may have become disconnected, so it would be beneficial to check the wiring in order to ensure that all connections are properly secured.
1/13/2023 7:42:21 PM • Car Audio &... • Answered on Jan 13, 2023
0helpful
1answer

I have a 2006 VW beetle with 6 CD changer in trunk. How do i get CDs out?

Vous devez ouvrir le couvercle du chargeur de CD et appuyer sur le bouton "Eject". Le chargeur de CD lib?rera alors les CD.
1/13/2023 7:39:39 PM • Car Audio &... • Answered on Jan 13, 2023
0helpful
1answer

Ford ka radio displays locked

If it displays LOCKED 3 then leave it SWITCHED ON UNDISTURBED for as long as it takes to automatically reset itself.

Make sure you have the correct code

However if it says LOCKED 13 then your radio is fully locked (due to 13 or more wrong codes being entered previously ) and can only be reset by the Main Dealer or a Radio Decoding Service
1/10/2023 2:31:57 PM • Car Audio &... • Answered on Jan 10, 2023
0helpful
1answer

Valencia mp36 dont play cd . Walking for 2-3 minutes and no sound. How to fix it please

There could be a few possible causes for the CD player in your Valencia MP36 not playing CDs properly. Here are a few things you could try:
  1. Clean the CD. Dust, dirt, and fingerprints can all interfere with the CD player's ability to read the disc. Use a soft, lint-free cloth to gently clean the CD.
  2. Check the CD for scratches or damage. If the CD is scratched or otherwise damaged, it may not play properly.
  3. Check the CD player's laser lens. The laser lens is responsible for reading the CD and can become dirty or misaligned over time. If the laser lens is dirty, use a CD lens cleaner to clean it. If the laser lens is misaligned, you may need to have the CD player serviced.
  4. Check the CD player's connections. Make sure that all of the connections between the CD player and the amplifier or receiver are secure.
If these steps do not help, it is possible that there is a problem with the CD player itself. In this case, you may need to have the CD player repaired or replaced.
1/7/2023 8:57:00 AM • Car Audio &... • Answered on Jan 07, 2023
0helpful
2answers

CD Changer in RX330 Lexus 2004 shows error 4

I just fixed my 2005 RX330 CD changer jam, and saved $800-1000. It was easy, if you first spend $6 at:
http://www.carstereohelp.com
Here you will find pics and instructions on how to remove the stereo/changer. Mine was a Pioneer, and the stereo came out in 5 minutes. I could not find instructions how to take it apart, so I experimented a little. The secret was to take the top lid off the changer - 9 little screws, and a piece of black tape. Under the lid, I found my problem - a CD had been inserted too soon (the WAIT sign actually means what it says!), and I just lifted it off the top plate. Under the plate I could see 2 more CDs, in the 6 slot holder, but they seemed to be free and not jammed. So without reassembling the stereo, I plugged it back in. The changer cycled, I hit eject twice to get the other CDs out, and all is well.
1/6/2023 2:39:54 PM • Car Audio &... • Answered on Jan 06, 2023
0helpful
1answer

Changing the stereo to English

'make model (what it is)' in all questions please.Googlemake model change radio languageyou can also use a smart phone with the Google Translate app on it and translate what you are seeing on screen.Also note that some units are for the Japanese domestic market and only come in Japanese.
1/5/2023 6:30:31 AM • Car Audio &... • Answered on Jan 05, 2023
Not finding what you are looking for?
Aiwa CDC-X227 CD Player Logo

25 questions posted

Ask a Question

Usually answered in minutes!

Top Aiwa Car Audio & Video Experts

AAA TV Service
AAA TV Service

Level 2 Expert

272 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

57151 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you an Aiwa Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Aiwa Car Audio & Video

  • Aiwa Car Audio & Video

Most Popular Question

get e03 error display when playing cds

  • Car Audio & Video
Loading...