20 Most Recent
Aiwa CDC-X304 CD Player - Page 5 Questions & Answers
Cage/Holder FM & DAB reception issues
It sounds like you are having trouble with the radio and DAB reception when the head unit is in the cage/holder. This could be caused by either a faulty antenna connection or a faulty ground connection. To troubleshoot, first check the antenna connection to make sure it is securely connected. If the connection is secure, then check the ground connection to make sure it is properly connected to the chassis of your vehicle. If the ground is not connected properly, it can cause signal interference and reception issues. If these steps do not resolve the issue, then you may need to contact a professional for futher help.
891 mini component system will not turn on
If your 891 mini component system is not turning on, there could be a few possible causes for the issue. Here are some steps you can take to troubleshoot the problem:
- Check the power source: Make sure the system is plugged in and that the outlet it is plugged into is functioning properly.
- Check the fuse: If the system is plugged in and the outlet is functioning properly, the issue may be with the fuse. Check the fuse to see if it has blown and replace it if necessary.
- Check the power cord: If the power source and fuse are both functioning properly, the issue may be with the power cord. Check the cord to see if it is properly connected and in good condition. If the cord is damaged, you may need to replace it.
- Check the power switch: If the power source, fuse, and power cord are all functioning properly, the issue may be with the power switch. Check the switch to see if it is functioning properly and test it to see if it is turning the system on and off as expected. If the switch is not functioning properly, you may need to replace it.
Connector of steel
Need Steel Mate subwoofer model no. SW826,power/speaker input cable ASAP
How to reset equaliser?when i turn up the volume the sound has too much bass. I fot JVC RX-5042 audio reciever .
To reset the equalizer settings on a JVC RX-5042 audio receiver, you will need to follow these steps:
- Press the "Menu" button on the receiver.
- Use the arrow buttons to navigate to the "Sound" menu, and then press the "Enter" button.
- Use the arrow buttons to navigate to the "Equalizer" option, and then press the "Enter" button.
- Use the arrow buttons to navigate to the "Reset" option, and then press the "Enter" button.
- Press the "Menu" button to exit the menu and save the changes.
This will reset the equalizer settings to the default values. If you continue to experience issues with the bass level when the volume is turned up, you may need to adjust the equalizer settings manually. To do this, follow the steps above to access the equalizer menu, and then use the arrow buttons to adjust the levels of the different frequency bands (bass, mid, treble, etc.) to your liking.
I hope this helps! If you have any further questions, don't hesitate to ask.
Not finding what you are looking for?
