20 Most Recent DeLonghi RT200 Retro 2-Slice Toaster Questions & Answers

De Longhi CT021.A x 2 slice toaser - Won't stay down

Is it plugged in. You may have to do a little handy work, unplug the unit and look to see where it catches when the handle is in down position, you may have to open the bottom door. There is a little catch when the handle is down it may need to be bent a little not much.

Read full answer

DeLonghi RT200... • Answered on Jun 22, 2017

2 Answers

Bta 840 flashing lights

Be the first to answer

DeLonghi RT200... • Posted on Jun 15, 2014

0 Answers

pdf Manual

RT200 Retro 2-Slice Toaster Manual

DeLonghi Kitchen Appliances -... | Uploaded on Oct 23, 2013

The lever doesn't stay down anymore, what should I

It sounds like the latch is broken. Unless you are very comfortable opening appliances and know very well what you are doing, it is best to have the toaster replaced. Check if it's still under warranty, or buy a new one.
Any workarounds to block the lever in its down position are very dangerous and a potential fire hazard. You may be able to wiggle the lever into place so it catches whatever is left of the latch, but make sure it will pop up easily when the toast is ready.
I hope this helps.

Read full answer

DeLonghi RT200... • Answered on May 02, 2013

2 Answers

After cleaning Delongi RT200 Toaster cannot use

Be the first to answer

DeLonghi RT200... • Posted on Oct 09, 2010

0 Answers

How do I clean a Delonghi toaster?

Be the first to answer

DeLonghi RT200... • Posted on Jul 22, 2010

0 Answers

Toaster Does Not Work...

You may hve gotten some moisture inside the plug, just leave it for a few days to let it dry out, if the problem persists, send an e-mail to the following:
[email protected]

Read full answer

DeLonghi RT200... • Answered on Dec 06, 2007

1 Answer

Fryer. Why does it turn on, then 3 or 4 seconds later turn off and display "ERR"?

bad power supply or heating element

Read full answer

DeLonghi Kitchen... • Answered on Feb 28, 2021

1 Answer

We are on our second DeLonghi Argento Flora kettle in 3 weeks. In both cases on lifting the kettle off the base there is anl amount of water on the base. Is this normal.

Be the first to answer

DeLonghi Kitchen... • Posted on Feb 08, 2021

0 Answers

My Delonghi Scultura kettle wont switch off automatically when the water is boiled.

Most self stopping kettles have a bi-metal piece, generally in the handle or top part, which, when boiling, gets one side of the metal to expand more than the other, causing it to bend and mechanically turn off the switch. There are many causes that it can stop working- iron fatigue, corrosion, jammed switch etc that can make it stop working. In general, it <strong>wouldn't</strong> be financially worthwhile to repair it, however many people still use them when they stay in the room, since they still do a decent job of boiling the water quickly. Typically they have a safety, so the thermo-fuse will shut it before a fire starts- on your own risk. It's usually not so expensive to get a new one, so I'd go for using it temporarily til I get around to getting a new one!

Read full answer

DeLonghi Kitchen... • Answered on Jul 01, 2019

3 Answers