20 Most Recent
Aiwa NSX-A115 Shelf System Questions & Answers
CD changer goes in and out on its own. Then it stays out.
That model is known to have bad solder joints around the transformer in the power supply. I would open it up and resolder all the terminals of the large transformer, with the unit unplugged ofcourse, and then check to see if it works.
Open/close doesn't work
When you press Eject CD button, do you see CD display blinks as if its preparing to be ejected? If its true then eject switch is working and cd mechanism is stuck, requires service. Also check loading belt in mechanism.
And if unit shows no response on pressing CD Eject button then switch is bad, replace it.
Power turns off immedietly
Yeppers, when you where changing out those speakers, you shorted them and that in turn blew out the audio output IC inside this unit. This will require you to disassemble the unit, locate the blow output IC abd unsolder it, get a new audio output IC, put some heatsink compound on the back of the new IC, resolder the chip and reasassemble the unit. But before you turn on the unit, double check those speaker wires again to make sure they are not shorted as if they are, even one tiny strand, this unit will blow the IC again. Never work the speaker on any solid state electronic amp when they are plugged in and on. Good Luck
Volume
the volume control needs to be cleaned. this control is a step switch basicly. and the switch contacts are not making proper contact. cleaning this requires dis-assembly and desoldering so if you are inclined to do this work happy fixing if not it shouldn't cost much to fix.
HOME STEREO SYSTEM CD PLAYER
I WOULD LIKE TO KNOW WHY AFTER PAYING WHAT I DID FOR YOUR ENTERTAINMENT CENTER THAT I WOULD HAVE TO PAY FOR THE REPAIR SERVICE PLAN?????? THAT JUST DOESN'T SEEM FAIR AT ALL TO THE CONSUMER. I WOULD LIKE THE EMAIL ADDRESS TO SOMEONE OF SUPVISOR POSITION. THANK YOU
INSTEAD OF CLOSING THE CD LOADER WITH THE OPEN/CLOSE BUTTON SIMPLY CLOSED IT BY CHOOSING THE TRACT NUMBER WANTING TO PLAY. SO FAR IT HAS WORKED. BUT WILL NOT WORK AUTOMATICALLY WILL TRY PROGM. THE REMOTE NEXT SEE IF THERE IS ANY LUCK WITH THAT PART.
THANK YOU
SURROUND SOUND
does sterio system have aux in tv has rca outs use rca cable from tv outto aux in on sterio system ok the selct aux input on sterio turn it up
cheak tv settings for outout options ok
CD Changer
Common Problem with AIWA 3 disc machines. I have 3 in my service shop right now.
For tray not rolling in on it's own, the drive rollers have to be changed, along with the Drive Belt.
Also, for CD not reading, try CD lens cleaner.
Won't read disc
The laser lens in your CD might be dirty or failing.
Try the following solutions:
Clean the laser lens with a DVD player lense cleaning disc.
Lense cleaning discs are available at many electronics retail store.
Sorry i can't help you more.
Cassette door stuck closed
Firstly: do not think about forcing the cassette door!
Look inside the unit. You need to hand rotate the capstan flywheel a
bit,( a large-ish metal disc attached to the motor via a rubber drive belt.)That should release the powered deck mechanism and allow
ejection.
Then buy a new drive belt , so that problem does not recurr.
Good Luck
Not finding what you are looking for?