20 Most Recent VIA P4MA Pro Motherboard Questions & Answers

ou must configure the setting through the BIOS setup to activate

VIA P4MA Pro... | Answered on Apr 22, 2014

go to boards web site support then download drivers

VIA P4MA Pro... | Answered on Apr 15, 2014

I don't see it,


I DO see what looks to be a jumper cap, in-between IDE 1 and DIMM 2; BUT only in this photo,


Reddish/Orange in color. (Use mouse zoom in feature)

I'm also looking dead at the Motherboard Manual, and do not see it shown, or listed,


On the middle/left side, where in blue it has in a list;

Click on Manual.

(It's a PDF file. The computer you are using now has Adobe Reader on it, which uses PDF files.

ORDINARILY it takes maybe 20 seconds tops, to download a PDF file. This one took almost 2 minutes!
Letting you know in case you do not see anything happening.
I just waited on the blue download progress bar.

Do you have the Clear CMOS jumper, down by the VIA southbridge chip?
It's right above, and in-between the USB 3 and 4 header, and the Front Panel header.

Post back in a Comment.


VIA P4MA Pro... | Answered on Feb 19, 2013

You will need to open the computer case and check that the cables that run from the actual power button to the motherboard are plugged into the proper spot on the motherboard. Sometimes reseating the cable can fix this issue.

I think this is the link to your motherboard documentation: http://www.via.com.tw/download/mainboards/3/4/p4mapro533_r100.pdf

Check the page 2-14 or 2-15 and see if that helps you to identify the actual connection for your power switch.

VIA P4MA Pro... | Answered on Nov 15, 2011

Bottom right corner, on the F panel set of pins. The correct pins for each is printed on the board.

VIA P4MA Pro... | Answered on Jun 06, 2010

either you have bought an incompatable chip for the mother board. or your power supplie is not powerfull enough I know this sounds stupid but it happened to me when I upgraded to a P4 3.6 quad core I installed the lot and it wouldnt start up I had a good power supply too Get your self at least a 500 watt PSU

Hope this helps

VIA P4MA Pro... | Answered on Apr 20, 2010

hold del at the boot up when you first push the power button.
instructions on how to access it are on screen briefly at the bottom in boot up mode before it gets to the operating system. in some cases it it f8 to access it

VIA P4MA Pro... | Answered on Feb 03, 2010

Try this sight for what you are looking for http://www.driver100.com/category/13/popular/desc/1/Mainboard_Drivers_and_Utilities.html

VIA P4MA Pro... | Answered on Mar 05, 2009

First question: Are you sure you have a PCI card?
there are several points here:
Make sure you have the monitor connected to the correct output on your computer. (In this case to the output of the graphics card, not to your onboard output)
If you have a PCI card set bios to PCI
Setting it to AGP means the computer is looking for a graphics card in you AGP-slot on you motherboard.

I cannot help thinking, that you actually have a AGP card in a AGP slot and that you computer is not working on onboard, but on AGP. But you can check which graphics device is used, in display properties (right-click Desktop, Properties, Settings)

Please post some feedback

VIA P4MA Pro... | Answered on Apr 05, 2008

click START then ALL PROGRAMS then RUN, type inside the dialogue box DXDIAG press ENTER

VIA P4MA Pro... | Answered on Dec 26, 2007

ask them yet, call them and ask, we cant call for you.
here is there contact page, do that yet.


VIA Computers &... | Answered on Dec 03, 2019

Hello everyone! If you require the service of a professional hacker to help track your partner's cell phone remotely, contact cyberhackanswers @ gmail com, he was excellent in helping me hack my wife’s phone without physical contact. you can also reach him on WhatsApp on  +1 626-578-5544 , tell him James referred you he would give you a discount.

VIA Computers &... | Answered on Sep 10, 2019

Unable to tell you without more information. Use the comment menu in FIXYA if you can provide details. For example, what city or country could he be in, perhaps you can answer.

We usually recommend using https://www.google.com to search for answers to questions like yours, although we prefer repair questions for do it yourself issues about equipment.


VIA Computers &... | Answered on Aug 28, 2019

Most of the people don't have money at right to make payment for common things such electric billing, medical bill and much more. In order to come out such the problem, then installment loans are specially designed and out from financial problem on the same day itself without hard and risk terms and conditions. By lending loan via online is safer and hassle-free from the customer and lender never collect a hidden charge on borrowing the money from loan providers. When you come online process which gets completed in the three steps such apply via online, instant approval and check your account. Resource https://slickcashloan.com/

VIA Computers &... | Answered on Aug 27, 2019

Sounds like the resolution of your Macbook Air video adapter it much higher than what is supported by the Roku or TV.

VIA Computers &... | Answered on Aug 26, 2019

Not finding what you are looking for?
VIA P4MA Pro Motherboard Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top VIA Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers


Level 2 Expert

257 Answers


Level 3 Expert

943 Answers

Are you a VIA Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

VIA Computers & Internet

  • VIA Computers & Internet

Most Popular Question

pc boot after upgrading cpu

  • Computers & Internet