VIA ECS PM800-M2 PM800 P4FSB 800 Supports Intel Pentium 4 Processor (REV:1.0) (ECSPM800M2V10) Motherboard - Page 9 - Answered Questions & Fixed issues
I want to send a cv via email please tell me what is bcc or cc in an email
Bcc is blind carbon copy this allows you to send an email and include someone you don't want everyone else in the email to know has been included. Like a supervisor etc..
cc is carbon copy this is to just inform someone of something not necessarily to get a reply from them. I.e. I email you about work that I need to make sure gets completed. I cc my supervisor so they know to expect that work from you.
I may bcc my supervisor in this as well if you have not followed through with work in the past.
Hope that helps!
Normal POST, system hangs after PCI device listing.
Bios updates are intrinsically dangerous and not guaranteed. If something goes wrong during the operation or it does not work you often wind up with junk. If you have a spare hard drive you might try loading that to see if it takes. If so then the issue is with the OS on your first drive. If the install does not work then it may be a bios issue and .......... Good luck!
How/where do I enter pairing code?
When you want a bluetooth device to connect to your computer's bluetooth receiver, you have to set up the 'password' (which you decide) on both your PC/laptop AND your external device (e.g. BT enabled mobile phone). Generally on the PC/laptop this will be via the drop down menus got by right clicking the BT symbol on your desktop and selecting 'properties' (or via the start menu listing for BT device etc). Then for example your mobile phone's BT menu, via its settings. Do this for each external device. Sometimes devices come with a preset passkey/pairing code which can be a default of 0000. Consult device documents. If the device has no preset then set it up to be the same as the one you set for your PC BT receiver. Test the link by sending (TX) a file to the external device & vice versa (receiving device must be set to receive FIRST)
Sydney to Forster. Via Lakesway from Bulledah
Do you mean how long? About 4 hrs drive. How far? About 312 km.
We did this recently and it is a great road to the Lakes Way turnoff. Thereafter it narrows and winds about a lot until you come out of the hills and onto the flat part next to Myall Lake. It is still narrow, and you must pay attention on the bends especially.
A lot of people recommend continuing on the Highway north over the Wallamba River to Failford and turning off there to come into Forster from the North. I haven't ever gone that way.
BTW we thought the best club meals were at Club Forster, although the Golf Club wasn't far behind, and the Bowling Club has all-you-can-eat asian food.
.
Can not connect to pc via usb
Some things you can try.....use the rear usb slots as these are direct to motherboard and tend not to throw unrecognised messages...whereas front usb slots are connected by cable onto motherboard and are prone to failure.
if the rear still produces no connectivity then you could try going into control panel to hardware management.quick way is to press the window button and pause break together.uninstall the usb driver and rescan this usually reset the count failure of the usb slots which on some machines cause usb to go dormant.this solution also works for dormant cd drives.
Not finding what you are looking for?
