20 Most Recent VIA ECS PM800-M2 PM800 P4FSB 800 Supports Intel Pentium 4 Processor (REV:1.0) (ECSPM800M2V10) Motherboard - Page 3 Questions & Answers


Copy and paste url for manufacturers page scroll to bottom and clicl on the drivers link in Red on bottom right of page a pop up with links to download all drivers will come up.

VIA ECS PM800-M2... | Answered on Mar 26, 2009


this is quite normal when u log off......or the screen saver kicks in as its set to require login when active

when u log in it will then load your user profile....

let me know if i fixya problem

VIA ECS PM800-M2... | Answered on Feb 25, 2009

there is CR 2032 or CR 2016 installed on the mother board open the cover of ur cpu and u can see that battery installed like coin simply change it and it will be fixed

pls let me know if i fixya problem

VIA ECS PM800-M2... | Answered on Feb 25, 2009

check if the drivers for the plugs are installed , it might been undetected on windows instalatin..or they might been disabled from sevices ...enable and run again the sound driver instalation

VIA ECS PM800-M2... | Answered on Feb 22, 2009

eneble cpu overcloking from bios settings, but I do not recomand this cause you might fry it..:P so...reboot , press del to enter bios settings ..choose cpu setings by pressing enter , choose overcloking ...sellect by pressing enter ..at the end ya press F10 and yes to save and reboot

VIA ECS PM800-M2... | Answered on Feb 22, 2009

U can find via drivers for most of the os including many distributions of linux here


VIA ECS PM800-M2... | Answered on Feb 13, 2009

when you go to install windows xp, select the option to format drive before reinstalling.

VIA ECS PM800-M2... | Answered on Jan 02, 2009

dispalay drive

VIA ECS PM800-M2... | Answered on Dec 26, 2008

If by "Reboot" you mean turn-off and restart, your CMOS battery is probably bad and not able to supply enough power to the bios to retain your time settings. Replace the CMOS battery.

Many web sites require the proper date and time on the surfer's PC. For example, Microsoft Update will not allow downloads if the surfer's PC date and time are far out of syncwith the real time. Ironically, even the Update Time function on the surfer's PC will not work if it is too far out of sync.

VIA ECS PM800-M2... | Answered on Oct 31, 2008

defragging uses a lot of disk drive space and memory. while you encountered a problem during the process of defrag, you may experience some data corruption after the startup, thus, your computer wont boot... only remedy for that now is to do a reformat.

VIA ECS PM800-M2... | Answered on Oct 31, 2008

There is either a problem with your memory or your BIOS settings. Did you recently change any settings in your BIOS? If so try resetting it. You may refer to the motherboard user Guide for help regarding resetting your BIOS/CMOS settings. If you cant find it you may also try to remove the CMOS battery on your motherboard for a few hours and then connect it back this should have reset your BIOS.

If you are sure you havent changed any settings then there may be a problem with your RAM or the slot in which the RAM is connected. Check it by using a spare slot on your comp. If it does nt work then you may have to replace your system RAM.

VIA ECS PM800-M2... | Answered on Oct 30, 2008

Replace the cable that goes from the wall socket to the power supply and post back results

VIA ECS PM800-M2... | Answered on Aug 10, 2008

your motherboard may be experiencing compatibility issues with that memory youve jst installed. it will work for some time but when it starts to become unstable, it will restart, you have yo adjust the memory timings for that memory in BIOS.

VIA ECS PM800-M2... | Answered on May 22, 2008

reformat means that you have to install an fresh copy of your operating system to the hard drive. if you do have a cd of your windows installer like windows xp, just put it in your cd drive and restart your computer and boot from that cd. be sure to erase the partition that has your corrupt operating system installed ok to replace it with the new xp that your going to install...

that wasn't to hard was it?

VIA ECS PM800-M2... | Answered on May 01, 2008

So you have the PM800-M2 board?
Visit - http://www.ecsusa.com/ECSWebSite/Downloads/ProductsDetail_Download.aspx?detailid=453&DetailName=Bios&DetailDesc=&CategoryID=1&MenuID=6&LanID=9
You can fine the latest bios there. And it also explains how to use it. But you need to confirm this is the board that you have first!

VIA ECS PM800-M2... | Answered on Oct 24, 2007

what you should have done was uninstalled the old motherboard drivers first as these drivers will be running the board although incorrectly, if you still have the installation disc run it as if to install, but it should show up with the option to uninstall the drivers.

VIA ECS PM800-M2... | Answered on Sep 26, 2007

ask them yet, call them and ask, we cant call for you.
here is there contact page, do that yet.


VIA Computers &... | Answered on Dec 03, 2019

Not finding what you are looking for?
VIA ECS PM800-M2 PM800 P4FSB 800 Supports Intel Pentium 4 Processor (REV:1.0) (ECSPM800M2V10) Motherboard Logo

Popular Tags

77 questions posted

Ask a Question

Usually answered in minutes!

Top VIA Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers


Level 2 Expert

257 Answers


Level 3 Expert

943 Answers

Are you a VIA Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

VIA Computers & Internet

  • VIA Computers & Internet

Most Popular Question

not drivers audio

  • Computers & Internet