20 Most Recent Alpine CDA-9827 CD Player Questions & Answers


Check all non-working speaker impedence. One or more is probably shorted and damaged the amp section.

Alpine CDA-9827... | Answered on Jun 02, 2015


You can always bypass the ground wire and connect ground directly to the chassis of the radio.

Alpine CDA-9827... | Answered on Aug 15, 2011


  • To use the kca-420i as an auxiliary follow these steps.
  1. Press and hold the "F/Setup" button for five seconds.
  2. Press the forgbutton to select "aux."
  3. Press the Band/Tel. button to toggle the mode between "Aux On" and "Aux Off".
  • Initial factory setting is set to "Aux Off"
  • You can set the Aux mode display by pressing the g or f button after Aux On is set, select the Aux mode display setting, and then press the "Band" button.
  • When connecting the kca-420i, you can set two Aux mode displays.
  1. Now press the "F/Set Up button to return to normal mode.
  2. To adjust the volume and what not first press the "Source/Power button and select the "Aux" mode the adjust as you wish.
  • Remember that when you use the Versatilite Link Terminal, kca-420i, you can connect two external inputs. To select the mode you want just press "Band/Tel" buttons on the head unit.


Regards, Tony

Alpine CDA-9827... | Answered on Jun 01, 2011


Blackout Mode On and Off

When the Blackout mode is turned on, the display will

turn off to reduce power consumption.

This additional power enhances the sound quality.

1 Press and hold the B.OUT button for at least 3

seconds to start the blackout mode. By doing so the

display will turn off.

NOTE

If any button on the unit is pressed during the blackout mode, the

function will be displayed for 5 seconds to show the operation

before returning to Blackout mode.

To cancel the blackout mode, press and hold the
B.OUT button for at least 3 seconds.

Alpine CDA-9827... | Answered on Mar 31, 2011


Make sure the antennae input is plugged into the back of the head unit. There should be a lead behind the dash coming from the car for the antennae. This will plug straight into the back of the head unit to receive radio signals.

Alpine CDA-9827... | Answered on Mar 08, 2011


To use an auxillary input on this radio - you need the correct cabling to "trick" the radio into thinking there is a CD changer attached.

CLICK HERE to see the adapter required.
Then you will need a different adapter that converts your 3.5mm jack to component RCAs.

THIS ONE is the second plug you need.

Then you can use your 3.5mm male to 3.5mm male cable.

Or you can eliminate this cable and get a 3.5mm MALE to Male RCA cable like this one...
CLICK HERE

Thanks!!

Alpine CDA-9827... | Answered on Jan 21, 2011


you can try pacparts.com

Alpine CDA-9827... | Answered on Sep 28, 2010


well, if you have aftermarket speakers with no amp, the radio may not have the power the speakers need and it clips at that volume to protect for damage. if you have factory speakers, I don't know what it would do that, the speakers would blow before the radio would clip if they were factory because the radio would have more than enough power to push them.

Alpine CDA-9827... | Answered on Sep 20, 2010


There is a lock whicch has to be removed by inserting the KEY that comes with the set . However if you do not have this with you , you might have to use thin flat blade of about 10 cms width to push into the sides after removing the front panel.
Before the set is removed check for the fuse on the fuse panel , If fuse is Ok then the set has to be removed.
Once the set is removed then the positive from the switch and the main continuous positive must tbe present on the line. if not trace and correct.
However if the power is fine then you have to clean the front panel and also the connections on the base panel. Fix the front panel. If the set does not power then you will need to open set and check on the mother board for failure of the regulator, the micro controller, check power to these sections.

Alpine CDA-9827... | Answered on Aug 23, 2010


The Alpine CDA-9827 only has an input connector for an external CD Changer.

You could get an FM Transmitter for your MP3 Player, and play your MP3 Player using your FM Radio in your Stereo.

Here is an excellent MP3 Player FM Transmitter:
http://astore.amazon.com/tps03-20/detail/B000E43GOO


Here is a copy of your Owners Manual.


I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Alpine CDA-9827... | Answered on Jul 24, 2010


you can try resetting it. there might be a hole about the size of a pencil tip on the sub panel (behind the face). if no reset switch, try disconnection power to the radio. if you can't get to the back of the radio to disconnect the wire harness, try disconnecting the battery for a few minutes.

Alpine CDA-9827... | Answered on Apr 21, 2010


Make sure the Deft control is set to OFF. Push the volume control until you see Deft on the screen and turn the knob until it says off on the screen.

Alpine CDA-9827... | Answered on Jan 15, 2010


go for a new fuse

if it is 10A go for 15A
add +5Amp fuse to your present fuse
and then try

Regards
reply by a Vote

Alpine CDA-9827... | Answered on Sep 22, 2009


no it is in the power lead (in line fuse) of the units wiring harness at back, should be 2 fuses one in a red wire and one in a yellow wire, red is power from ignition yellow or other is keep alive memory and laways hot...

Alpine CDA-9827... | Answered on Aug 09, 2009


You have the wrong blue wire powering up the amplifier. Try blue/white . The radio is trying to raise the antenna while you are on the radio and not on the cd

Alpine CDA-9827... | Answered on Jul 07, 2009

Not finding what you are looking for?
Alpine CDA-9827 CD Player Logo

Popular Tags

42 questions posted

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you an Alpine Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Alpine Car Audio & Video

  • Alpine Car Audio & Video

Most Popular Question

cda 9827 black ground wire came out

  • Car Audio & Video
Loading...