Apex Digital AT2708S 27" TV - Answered Questions & Fixed issues
No sound and picture does not fit tv screen
Fault at its main digital board.
Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. ...
7/25/2017 12:59:28 PM •
Apex Digital...
•
Answered
on Jul 25, 2017
•
284 views
How to unlock at2708 apex tv
If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Pull up older posts. Surf the site with patience.
Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/
Unlock procedure to many popular brand TVs are given.
7/17/2014 5:54:44 AM •
Apex Digital...
•
Answered
on Jul 17, 2014
•
79 views
Apex gt2715 vertical sweep capacitors
Check the filter capacitor to the power supply to vertical output section. Normally, this supply will be provided by LOT. Check the rectifier diode and smoothing capacitor. Replace all the electrolytic capacitors [5 or 6 of them] in the vertical output section. It will be the best remedy. Never forget to replace the supply smoothing capacitor described above.
Visit the site named 'Electro-help' for
more details. Click this link. View it in
"Timeslide" or "Flipcard" option, which can be selected
from the drop down box menu by the [Sidebar] tag, at the top left corner
of the display window. It will make
search easy. There are more than 1250 posts to different brand TVs now. Pull up
older posts there.
11/22/2012 1:29:57 PM •
Apex Digital...
•
Answered
on Nov 22, 2012
•
48 views
On my Apex TV screen,
You cannot adjust the resolution in CRT TVs. Its not like a monitor that is compatible with a number of resolutions from a computer for example. CRT TVs resolution's dont work like that.They take an input usually from a composite, Svideo or coaxial source and display it on the screen.
When you say the picture is cut out is there a black bar on top/bottom/middle of the screen? In older CRT TVs that usually means a problem with the TV itself and would need to be taken in for repairs or replaced.
3/5/2011 4:00:35 AM •
Apex Digital...
•
Answered
on Mar 05, 2011
•
375 views
I have an APEX, model no AT2708S, s/n DF282374776,
Yes,this tv is an analog tv,free air tv channels are all digital now.Tries walmart,Target stores,might still sell these digital converter boxes.Not,tries websites like Amazon.com,Ebay.com they still sell these converter boxes.
11/25/2010 6:29:45 PM •
Apex Digital...
•
Answered
on Nov 25, 2010
•
272 views
How do i unlock my t.v my t.v is blue
CHILD LOCK
The Child Lock feature prevents unauthorized viewing of the TV. To activate, press and hold the F key, and
then press MUTE. You should see a key symbol appear on the screen. This will lock out all remote functions
(except for Standby). To unlock the TV, press and hold the F key and press MUTE. This will unlock the TV.
Please note that the only way to activate or deactivate the Child Lock feature is via remote control - please
insure that it is stored securely.
8/30/2010 10:00:27 PM •
Apex Digital...
•
Answered
on Aug 30, 2010
•
334 views
My apex tv model AT2708S is locked and i can't
CHILD LOCK
The Child Lock feature prevents unauthorized viewing of the TV. To activate, press and hold the F key, and
then press MUTE. You should see a key symbol appear on the screen. This will lock out all remote functions
(except for Standby). To unlock the TV, press and hold the F key and press MUTE. This will unlock the TV.
Please note that the only way to activate or deactivate the Child Lock feature is via remote control - please
insure that it is stored securely.
8/30/2010 9:58:25 PM •
Apex Digital...
•
Answered
on Aug 30, 2010
•
379 views
How to unlock
The default code is 0000.
If the code was changed them call Apex directly to establish ownership.
3/28/2010 7:31:03 AM •
Apex Digital...
•
Answered
on Mar 28, 2010
•
154 views
Turning on and off on it's own
Hi,
Theres a possibility that the tac switches of your unit got stucked thats why your units function is intermittent. Try to have your buttons removed and have your units circuitry be resoldered.
chris
2/14/2009 5:28:18 AM •
Apex Digital...
•
Answered
on Feb 14, 2009
•
384 views
Can't see the scroll at the bottom of the screen
I was having the same problem. if you turn the vol. down to 00 then press mute on the remote then hold mute on the remote and menu on the tv for 3 seconds you will get the service menu and you can adjust the screen.
hope this helps.
2/2/2009 1:24:02 AM •
Apex Digital...
•
Answered
on Feb 02, 2009
•
461 views
My picture posisiton is not correct
There is a way to correct it. Adjustment of the deflection yoke to a desired ratio. But have the job refered to a qualified person because you will need the unit working during adjustments.
chris
3/23/2008 12:01:13 PM •
Apex Digital...
•
Answered
on Mar 23, 2008
•
116 views
Tuner Out
TEST123-TRY JIGGLING THE TUNER INPUT AS I HAVE SAME MODEL AND IT DID NEED A FEW TUNER CONNECTIONS SOLDERED OR OTHERWISE THE TUNER MAY NEED REPLACEMENT IF THAT HAS TO HAPPEN YOU MAY LOOK TOWARD REPLACING TV AS COST CAN BE ALMOST EQUAL UNLESS YOU CAN DO IT YOURSELF. JOE TV
11/19/2007 2:01:58 AM •
Apex Digital...
•
Answered
on Nov 19, 2007
•
67 views
No Picture
If when you press the volume or channel up or down button you get no OSD, that's is no channel number or volume up bars, have some one check the set for either a defective video out IC or a defective picture tube, or a bad cap in the power supply. Set should be serviced by a TV repair person.
Good day!
Toprol
11/6/2007 6:37:17 PM •
Apex Digital...
•
Answered
on Nov 06, 2007
•
96 views
Screen cuts off
sorry to say , you have a fault in the verticale sweep circuit in this tv. The problem is most likly a dried out or leaky capacitorm or a Verticale out put IC along with the capacitor. There are no user serviceable parts inside this tv so if your not familiar with the saftey issues with the HI Voltage inside of the tv set , then I would call in a pro to assist you with this repair. Also all the parts are soldered in and there are no replaceable mods. to change. Good Luck
2/10/2008 6:28:30 PM •
Apex Digital...
•
Answered
on Feb 10, 2008
•
301 views
I need to know how to change modes without controller when I'm using a dvd
Without a remote controller, you may have limited options to change modes on your Apex digital TV. However, you may be able to change the mode by using the buttons on the TV itself.
Here are some general steps you can try:
- Turn on your TV and make sure your DVD player is connected to it.
- Look for the "Menu" button on the TV and press it.
- Navigate through the menu options using the arrow buttons on the TV until you find "Input" or "Source."
- Press the "Enter" button to select the input/source option.
- Use the arrow buttons to select the input/source that corresponds to your DVD player.
- Press the "Enter" button to confirm the selection.
- Press the "Menu" button to exit the menu.
Note that the specific steps may vary depending on the model of your Apex TV. You may also consult the user manual for your TV for more information on changing modes without a remote controller.
2/24/2023 9:23:20 PM •
Apex Digital...
•
Answered
on Feb 24, 2023
•
25 views
Not finding what you are looking for?
