20 Most Recent Bang and Olufsen Beosound 2000 Shelf System - Page 4 Questions & Answers

The Phono/Aux input has a slider switch to the left of it to choose whether to make it a regular line-in jack or to utilize the phono stage. The ground terminal is just above the jacks. The Beogram 4002 likely has a muting circuit that's in effect when the tonearm is in the lift position, which would explain the lack of hum til the stylus lowered to the record.

local interference find another frequency for classic fm there are lots

it only works via b&o amplifier

1.2 for mmc20e mmc4 1.5 for mmc20s and mmc5

model number? most arms(not all) can be set this way if it has a turning counterbalance .turn counterbalance until arm just wants to go down slightly,hold counterbalance and turn dial around to zero.now turn counterbalance around to 1.2 or 1.5 depending on cartridge fitted

this old timer probably has an output amplifier fault.with a circuit diagram any competent engineer shoulb able to locate the problem with the turntable removed access is easy and so is replacing parts

master code is specific to each product and can only be obtained from b&o dealer proof of ownership will be required this code will unlock the product and allow a new pincode to be entered

model no. ?

belt kits are available on the internet and the mech is fairly easy to get out to work on

new mech required

using 5 pin plug into bc8500 use pins 3=l 5=r 2=gnd