20 Most Recent Philips cBright XG2 Multimedia Projector Questions & Answers

I have hp laptop with hdmi & vga, sharper image projector with rca connector what do I need to connect these two

Most laptops and projectors have VGA ports. So a monitor cable (not an extension cable) is needed; this is a cable with two male HD15 ends. The projector above has the following input available: Mini D-Sub 15 (Analog) (VGA), Component, and S-Video. If your laptop has DVI or HDMI you will need an adapter to go to the VGA.

I hope this helps.

Cindy Wells

1 touch bitten is not working clean the carbon

Your on the edge, possible that the image will be unstable (wiggly). Considered a VGA amp from Gefen to up the drive. 50ft is about max. You can try dumbing down the res if it is unstable. Less horizonal frequency to travel long distance. good luck

hello

to hack anything google it. or buy the new CANON tank printers. Canon , ended printer INK HOSTAGEEEEEE taking GONE, avoid HP is bliss. Life is way to short for INK counter malarkey. for sure.

Electrolytic capacitors, like car batteries, exhaust in time and become blobs of goo. If unused they leak and fail, if overused they wear out or over heat. Replacement of this machine is the only useful outcome. Sorry but fact for a 17 year old disposable machine that is now obsolete.

The batteries could have died in the remote and need to be replaced. Or the remote might be broken and you should buy another remote for your TV or it could be on the wrong settings for the remote.

Laser MFD 6020 no(t/longer) found it's been installed properly now it shows 'motor error)

HERE ya' GO! https://www.download.p4c.philips.com/files/s/s9711_31/s9711_31_dfu_nld.pdf Anthony

I find that often this is resolved after has been on for a few minutes as the tube warms up.
Particularly true in current cold spell !!
Pete

I don't know much about faxes but I have used a couple and found nearly all such problems are caused by the recipient machine encountering a problem and closing the transmission line. Standard machines aren't so bad and most problems I have encountered are caused when a desktop computer is used instead of a fax machine - they are often switched off except during office hours for instance...

You don't. All those units have different frequencies and are designed to work within their original system. If you add a another handset, chances are it will not communicate with the base unit.