20 Most Recent Iomega eGo BlackBelt Portable Mac Edition Hard drive 1 TB external FireWire 800 HiSpeed U USB 20 Questions & Answers

That sounds like what they would try to do, things that could be wrong is the converter board might have fried, if that is what it is then it can be easily opened up and plugged in to test it. If that is the problem then all the data should be recoverable. If you need further help, I’m available over the phone at https://www.6ya.com/expert/chad_70dccdc9090b1a75

link for program belowLink:

It's possible to clone to this drive, but over the USB interface, it will be very slow. Firewire would be faster. It's also possible to boot from it, but again, it will be slower than an internal. What you've described, however, IS possible.

The obvious answer is that the power supply is dead. If there is no external power supply connected then try connecting to an external powered usb hub. The drive is not getting power and the computer's USB power is not enough.

Mac can read a PC formatted drive but a PC cannot read one formatted by mac. So format the drive on the PC wiping all information on it, copy to it. Move the files to the MAC and reformat.

The obvious answer is that the power supply is dead. If there is no external power supply connected then try connecting to an external powered usb hub. The drive is not getting power and the computer's USB power is not enough.

Your Hard-drive is Crashed.

These are some of the most robust external drives available. But, everything breaks. The most likely cause is a failed controller in the case. Remove the drive and put it into a new case.

click start click to open on my computer you should see your usb drive could be E: or something right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box

then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7 click start control panel administrative tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive then you restore it to its default status

Right click on usb drive select properties you will have an array of options

Select the hardware option then select your drive properties policies

restore defaults

In XP

Right click on your drive select properties then on customize restore Default in W 7

you might have to alternate doing this repeatedly until the problem is resolved click start control panel scroll to folder options view place a tick in show hidden files folders and drivesthis may vary depending on your operating system if you need more help with this post a reply

hope this helps