20 Most Recent Curtis CMD5000 DVD Player - Page 5 Questions & Answers

0helpful
1answer

Curtis DVD player says no disk already cleaned lens. Has not been used in a while worked fine when put it up

The player is defective, it makes no diff what is the problem, they are not repaired because the cost new is so low.
2/24/2017 12:10:08 AM • Curtis Televison... • Answered on Feb 24, 2017
0helpful
1answer

Curtis mathes tv dish remote

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites. http://homenol.blogspot.com/ http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.
2/17/2017 2:18:15 PM • Curtis Televison... • Answered on Feb 17, 2017
0helpful
1answer

3 digit curtis tv remote code to use with Spectrum cable

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.... http://electro-medical.blogspot.com/
2/8/2017 3:08:53 AM • Curtis Televison... • Answered on Feb 08, 2017
0helpful
1answer

Programming a regular antenna to my curtis mathes cm27002s tv

If that is the big, old, thick picture tube style television (and I think it is) you cannot use it to get over the air (antenna ) reception with regular antennas any longer. Broadcast (antenna) television is now digital and older television sets don't decode it any longer. The good news is you can buy a converter on ebay etc. Hook the antenna to that and then connect the converter to the television.
2/7/2017 1:13:59 AM • Curtis Televison... • Answered on Feb 07, 2017
0helpful
1answer

Curtis 42 inch tv how to widen top to bottom

If there is a zoom function on the remote, use that. The broadcast program determines the screen size, so you may not be able to totally eliminate it.
1/22/2017 9:21:20 PM • Curtis Televison... • Answered on Jan 22, 2017
0helpful
1answer

How do I fix my Curtis 32" TV Model LCD3213. It turns on with no picture

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
11/29/2016 11:46:52 AM • Curtis Televison... • Answered on Nov 29, 2016
0answers
0helpful
1answer

My Curtis Mathes Stereo 1958-1965 need a transformer 12A19-1 can any body help? Stereo/radio

Look for it at Connemara market, Trivandrum.
11/4/2016 4:58:07 PM • Curtis Televison... • Answered on Nov 04, 2016
0helpful
1answer

Have a 40 inch Curtis flat screen shuts it self on and off has sound no picture after it has been on for about 10 minutes

I would not attempt a repair, the parts and labor will cost more than a new flat screen that is a larger size.
10/27/2016 10:58:39 PM • Curtis Televison... • Answered on Oct 27, 2016
0helpful
1answer

Curtis 3217A blinks red once

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
10/8/2016 9:44:29 PM • Curtis Televison... • Answered on Oct 08, 2016
0helpful
1answer

My Curtis tv model LCD1923A comes on with a voice but there is no picture

Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Type in this key phrase " my service table today " in the search box at the top right of the home page, to get gathered some pages which has the details of practical experiences of the author of that site.
9/30/2016 3:55:34 AM • Curtis Televison... • Answered on Sep 30, 2016
Not finding what you are looking for?
Curtis CMD5000 DVD Player Logo

Popular Tags

4 questions posted

Ask a Question

Usually answered in minutes!

Top Curtis Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Mike

Level 3 Expert

4383 Answers

mark warfield
mark warfield

Level 3 Expert

453 Answers

Are you a Curtis Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Curtis Televison & Video

  • Curtis Televison & Video

Most Popular Question

find user manual need help hooking up

  • Televison & Video
Loading...