20 Most Recent Sanyo (6102932751) Projector Lamp for PLC-SU30, SU31, 3 Questions & Answers

1, the lamp is ok 2,the lamp ballast is ok 3,seems that the power supply or mother board is defective We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

1,Check the fans ,whether the fan is running,when you turn on the projector 2,if the fans run, then ,check the lamp or lamp ballast We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry Lampdeng Limited

1,Check the fans ,whether the fan is running,when you turn on the projector2,if the fans run, then ,check the lamp or lamp ballastHave a good day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited http://www.lampdeng.com

I'm having a similar issue wit a Sanyo. Installed new Sanyo lamp but when you plug it in the warning indicators show that there is no lamp detected. Ballast issue? Sanyo tech support told me this is rare. I'm not all that confident about the lamp socket. it seems to be a loose fit. Can't find any info on a reset.

Question edited for clarity and toss in some CAPS. How to Reset a Sanyo Projector Lamp Timer?

1. Turn on the projector
2. Press the Menu button and the on-screen menu will appear
3. Press 3/4 button to remove the red frame pointer to the setting Menu icon
4. Press the 6 button to move the red frame pointer to the Lamp Counter Reset item and then press Select button
5. The message "lamp replace counter reset?" appears. Move the point to and then press Select button
6. Another confirmation dialog box appears and select to reset the Lamp Replace Counter

https://www.google.com/search?q=sanyo+wuxga+plc-zm5000l+reset+lamp+counter ..

To download drivers for the Sanyo XU 101 projector, you will need to visit the Sanyo support website. Here are the steps:

1. Go to the Sanyo support website by typing "Sanyo support" into your search engine and clicking on the first link.
2. Once on the Sanyo support website, click on the "Projectors" category.
3. Select your projector model, which in this case is the XU 101.
4. Click on the "Downloads" tab, where you can find the available drivers and software for your projector.
5. Look for the driver that you need and click on the download link.
6. Follow the instructions to download and install the driver.

If you have any issues with the download or installation process, you can contact Sanyo customer support for further assistance.

If your Sanyo DP42481 picture is upside down and mirrored, you can try adjusting the settings on the TV. You can do this by going to the Picture Settings menu and selecting the "Picture Orientation" option. From there, you can select the "Normal" option to reset the picture orientation. If the problem persists, you may need to contact the manufacturer for assistance.

The "U3" error code on a Sanyo AWD-AQ4000(S) air conditioner indicates that there is a problem with the unit's compressor. This could be caused by a variety of issues, such as a faulty compressor, a malfunctioning control board, or a refrigerant leak. To solve this issue, I recommend the following steps:

1. Make sure that the air conditioner is properly plugged in and receiving power.
2. Check for any visible damage to the unit, such as bent fins or loose wires.
3. Check the air filter and clean or replace it if it is dirty.
4. Check the outdoor unit for any visible damage or debris that may be blocking the airflow.
5. Check the refrigerant levels and make sure they are at the proper level.

If those does not work, it may be time to check with a professional!

Being an old projector and possibly it has an old lamp fitted. The lamp as it ages produces more heat. The fans as they age unless cleaned regularly. This build up of heat damages firstly the blue LCD imager and then the red. Nothing can be done about that except replace the LCD imagers. As a Sanyo Authorised service department, we used to charge them out at £1031 plus fitting.

Your print head is defective. Not worth fixing

Have you found a fix? I'm having the same issue!

Go to the Sanyo support site.