20 Most Recent Sharp AR-M350N Copier Questions & Answers

System error e007 for canon copier ir2016j copier needs solution

Sharp AR-M350N... | Answered on May 23, 2019

Try to reset this by #*C* and press 16 press start, if this not resolves your problem theEEPROM is defective , Replace EEPROM on the MCU PWB.

Sharp AR-M350N... | Answered on Apr 04, 2018

That means that fixing film ( Folie ) is worn out. Replace fixing film assy.

Sharp AR-M350N... | Answered on Mar 21, 2016

H5-01 means the machine has had a jam in the same place 5 times in a row.

Sharp AR-M350N... | Answered on Aug 25, 2015

my copier have a system error e0007

Sharp AR-M350N... | Answered on Aug 15, 2014

Replace the Mother Pwb the part number is CPWBN1460DS51..... Good Luck

Sharp AR-M350N... | Answered on Jul 17, 2014

This code from Fixing Unit like rotation film in fixing unit
check it and white grease i hope problem will solve if none then contact me for future.

Sharp AR-M350N... | Answered on Mar 14, 2013

H3-00 Heat roller high temp detection (HL1)Replace Thermistor -- You will most likely need a tech for this.

Sharp AR-M350N... | Answered on Sep 06, 2012

The error code F1-15 means that the stapler is not in home postion. It can also, be that the exit tray is not in "HP" aswell. I would turn the copier off and turn it back on and not use the stapler funcation. To repair the problem, there are a bunch of up dates to resolve this problem. I would change the out put tray from the finisher to the left out put tray... Good Luck

Sharp AR-M350N... | Answered on Mar 19, 2012

E7-03 means that the machines hard drive has gone bad. It can be backed up and replaced by a trained copier technician.

Sharp AR-M350N... | Answered on May 22, 2011

Are you getting this problem while trying to scan , if it is the most probale case is you are using DHCP setting on your pc and the ip address of the pc varies, so the machine is not able to send the documents scanned to the particular IP , to which the machine is configured what you can do is make the IP adress static and reconfigure the scanner by using sharp desk software or you can configure the scanner by giving the host nameof the particular PC if you have a DNS server , better way if you are not so familier with IT you go to network places, then click on view network connections and click on the properties and from the next window scroll down to TCP/IP click on properties and give a static IP, sub net and gate way this nos you can get by going to start menu on the run you type cmd then youwill get the cammand prompt window there you have to type ipconfig /all and press enter then it will give you so much information in which you can find the ip adress, subnet and gateway and give this to your pc and apply, then you open the internet explorer and type the ip adress on the adress bar and press enter then you can go to the machine web page then select administrtor setting the admin username and pass word is admin and admin, and press enter then go to image send settings and configure the newly given ststic ip to the particular PC, rate this and come back withmore queries.

Sharp AR-M350N... | Answered on May 05, 2011

H4 -Heat roller low temperature detection

Sharp AR-M350N... | Answered on Apr 13, 2011

there is a problem in control board or eeprom counter

Sharp AR-M350N... | Answered on Nov 25, 2010

Not finding what you are looking for?
Sharp AR-M350N Copier Logo

61 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts


Level 3 Expert

8091 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers


Level 3 Expert

1363 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Office Equipment & Supplies

  • Sharp Office Equipment & Supplies

Most Popular Question

system error e007 problem in canon ir

  • Office Equipment & Supplies