Brother Dcp395cn InkJet Printer - Answered Questions & Fixed issues

Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.

You can try calling Brother at 1-877-276-8437 and they should be able to tell you where to take the unit to have it repaired under the warranty. This is a very common problem that Brother is well aware of; the printhead will need to be replaced.

Some printers automatically print automatic duplex printing, other printers allow you to manually reinsert pages to print the second side .and some printers do not support duplex printing at all.

To find out whether your printer supports duplex printing, you can check the printer manual, contact the printer manufacturer, or check the printer's properties by clicking Properties in the Print dialog box

Note that If you have more than one printer installed, it's possible that one printer supports duplex printing and another printer does not.

Make sure the cartridges are proper and there is no dust on nozzle just clean with tissue paper and also use brother photo quality paper that is special type paper use that.

Hope this helps. Please rate my response.Thanks.Have a good day

Try using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English).

If you need more help come back.Post / thumbs / testimonial are welcome!

Should be able to find everything you need here:

http://welcome.solutions.brother.com/BSC/public/as/au/en/model_top/colormfc/dcp395cn_all.html?reg=as&c=au&lang=en&prod=dcp395cn_all

Trust this is helpful. Please vote. :)

unplug it

Remove the jammed paper. • Check that the paper is set in the paper tray correctly. • Check that there is not too much paper set in the paper tray. • Check that the thickness of the paper is within the standard. • Check that the size of the paper is within the standard. • Flip through the paper and reset it in the paper tray.

Remove and clean the pads in the waste ink chamber inside the machine. Then perform the purge reset.

Recommend contacting Brother directly

See if you can find the printer driver online (manufacturer's web-page maybe) and install the driver before you connect the printer.

http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_440CN_665CW_845CW_EN_287.PDF Under the troubleshooting section(pg.154) it lists this error as having one of two possible causes: just do CTRL plus f to find Unable to Clean XX in the pdf document As you failed to mention the model number it may not be your model number but the basic principal will be the same on the cause.

There is an absorbent pad under the print head when it is parked. When you clean the heads it catches the ink. It's time to clean the pad.

Turn off the printer and unplug it from the power. Then press and hold the power button for 1 minute. Now release the button, plug in the printer and turn it on and see if the error clears. If it doesn't fix the issue, you probably have to replace the cartridges. They will cost about $65. Good luck!

change the maintenance unit

change new toner cartridge or good quality toner for better image.also before refilling make sure remove old toner from the cartridge and clean inside the cartridge with blower. you will get with a good quality image

if you don't like to install ocr software to your computer, you can try this free online ocr tool

download utilities if your printer can use them

got the right cord?

Go to brother web site and check for updated drivers.