20 Most Recent Sharp AR-F152 Fax Questions & Answers

The Owner's Manual is available as a PDF from Sharp: http://esupport.sharp.at/html/om/DataOutputDetail.php?TemplateLang=en&ID=4583 . Please let me know if you need any specific help with the fax machine.

I hope this helps.

Cindy Wells

I'm assuming you already replaced the drum, and are still getting this error? Sometimes the chip in the drum that resets the counter is bad. This is esp. true if you get a reman drum. You should replace the drum and try again to see if this fixes the problem. Go back to the place you bought the new drum from and tell them the chip didn't reset the counter and if it's still under warranty they should replace it.

an l2 code is your scanner is not moving. sometimes the little lock under the scanner section get pushed or turn. this is stop the scanner from moving in transport. it is right above where the paper comes out. you will have to look for it. it protudes uner the glass to stop the scenner.

This model number appears to be a copier. Are you sure you have the right model?

http://safemanuals.com/zearch_634.php

There is a separate expansion kit you need to buy.

Use the manual AR-F151 it seems to use the same functions as the AR-F152
I set up my fax machine using this manual, and all the instructions worked so far.
Good Luck,
Bob

clean theSCANNER LENS WITH GLASS CLEANER ON A MICROFIBER TOWEL(SCANNER lens is under large feed roller on auto document feeder

Call a service tech.

What model brand name something!!!!!!

https://www.fixya.com/support/t14696300-reset_change_counter_sharp_ar_5726

Question edited for clarity, turned around, added CAPS, added the word 'manual'.Duplicate question should have been deleted but Kardoc has answered, albeit wrong model. Refresh page to see your question when you press 'Post Question'.UX-105 in Russian, or 510 in English, which is probably close enough.https://www.google.com/search?q=sharp+ux-105+manual..

https://www.manualslib.com/products/Sharp-Ux-510-641495.html

Question edited for clarity. Remove the curl out of the paper by running 6" across the edge of a desk against the curl. With scissors, cut the end 1/2" straight. Then cut a 1/2" off both corners at 45 degrees. Push the paper in the slot and press the Feed Button. https://www.google.com/search?q=Sharp+EL-1197PIII.+How+to+load+paper My instructions are better than the video, but shows the process well. ..

Hello, Just replace toner cartridge or refill the toner container with refillable sharp ar202 refill bottle or sachet. Remember to remove waste toner if you are refilling, right.

Error Codes > Sharp > MXC300W > Code L4-17

PrintCopy .info https://printcopy.info > brand=Sharp > code=L4-17 Code: L4-17; Description: Drum motor lock trouble; Causes: Drum motor trouble Connection trouble of the connector and the harness between MFPC PWB and the ... ..

SCIENTIFIC CALCULATOR OPERATION GUIDE

Sharp Global https://global.sharp > guidebook > documents > s... PDF Enters data for statistical calculations. Splits data used for dual-variable data input. (Used for dual-variable