20 Most Recent Radio Shack Multipurpose Laser Level - Page 2 Questions & Answers


You can try the following: 1# Check the main power cable & make sure it has 110V (Do not run the machine with long extension cable).2# Check all harness connection.3# Check keyboard cable connection on back of control board.4# If all the cable connection is good then you may need to replace the control board.

Measuring Tools... | Answered on Aug 02, 2020


Those are precision devices and require factory check up and calibration at regular intervals. Contact your dealer.

Measuring Tools... | Answered on Aug 01, 2020


Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference.
https://www.acurite.com/media/manuals/00754-instructions.pdf
Hard Reset:
  1. Bring both the sensor and display unit together and power down by removing at least one battery from each and/or removing the power cord.
  2. Make sure the A-B-C switch on both units matches. ...
  3. Reinstall the battery in the outdoor sensor.
  4. Reinstall batteries and/or power cord into the display unit
https://support.acurite.com/hc/en-us/articles/360013641694-3-in-1-Reset

Measuring Tools... | Answered on Apr 29, 2020


You may use following removals Tools
  • Moving Dollies
  • Pallet jacks
  • Hand Trucks
  • Hydraulic Tools
You may also get information about Removals Tools Here
Removal Companies Tools

Measuring Tools... | Answered on Apr 24, 2020


https://support.acurite.com/hc/en-us/articles/360007555574-Temperature-is-Flashing-Stuck-or-Showing-Dashes-on-a-Basic-Multi-Sensor-Display-

Measuring Tools... | Answered on Apr 22, 2020


Take it apart and get some isopropyl alcohol and a q-tip. check for corrosion around the terminals. If there is none, look for loose connections. If there is something loose, check if a bit of the board is loose. If a bit of the board is stuck to the terminals, give up on batteries.

Measuring Tools... | Answered on Apr 22, 2020


I do not believe that you can buy these separately. They are factory programmed and paired together.

Measuring Tools... | Answered on Apr 09, 2020


Your local Culligan dealer is the only place to get one. You need the retrofit kit to prevent the shaft of sealpack from bending.
RJ

Measuring Tools... | Answered on Mar 19, 2020


1
https://images.homedepot-static.com/catalog/pdfimages/c6/c6dfd8a3-256c-4785-a1b5-f845723b06e2.pdf

Measuring Tools... | Answered on Feb 28, 2020


If this is the Smart Electrician Non-Contact Voltage Tester (or similar)...then pull off the rear black piece
capture-y3qa0l2pi10cuve3mvc5nr3l-4-0.png

Measuring Tools... | Answered on Jan 18, 2020


A Geiger counter is a device for measuring radioactivity by detecting and counting ionizing particles.

Measuring Tools... | Answered on Jan 13, 2020


Sometimes the weather brings us surprises. For example, it is sunny in the morning bet when you leave your office, it is snowing outside. So, it can spoil our evening. In such cases, snow day finder is necessary because it can warn you about future weather changes.

Measuring Tools... | Answered on Dec 21, 2019

Not finding what you are looking for?
Radio Shack Multipurpose Laser Level Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Radio Shack Measuring Tools & Sensors Experts

Cindy Wells

Level 3 Expert

6222 Answers

Brad Brown

Level 3 Expert

18564 Answers

Harrie

Level 3 Expert

6746 Answers

Are you a Radio Shack Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Radio Shack Measuring Tools & Sensors

  • Radio Shack Measuring Tools & Sensors

Most Popular Question

high temperature 101 9 not home

  • Measuring Tools & Sensors
Loading...