20 Most Recent Sharp EL-2630P Calculator - Page 7 Questions & Answers

Are you just trying to get the total # of parts? If so it would be 23 x 1000 = 23,000 + 837 - Total = 23,837

Replacement Ribbon/Roller : NUK-BR80C

I assume you have gone through the basics such as actually unplugging it for a few minutes and replugging? This will reset all mechanical arms and things upon "reboot". Are there any troubleshooting tips on the data sheets you have?

I will check what I have, let me know what you've tried / find with the power.

hello. here you go. here is the entire owner manual for your use.

http://www.sharpusa.com/files/cal_man_EL1801V.pdf

Push the button at the top over from GT to SET.
type the date in using the decimal as a spacer.
Then press the date/time key.

for the time...
Press the date/time key until the date shows,
then enter the time in military time and press the date/time key again.

The ribbon code is BR80C. Nu-Kote has a version with a part number of NUKBR80C. You should be able to order it on line at Staples.

With the machine on, you need to change the "Rate" slider from GT to Set. Once you have done that, hit the clock button. Once you get to the time, enter in the time that it is. In order for the clock to differentiate from AM to PM, make sure you are entering as military time (EXAMPLE: 1:15AM would be entered as 1.15, then the clock button. 1:15 PM would be 13.15, then the clock button).

if your trouble is repeated after you switch the calculator off and on again your printer needs service in workshop.

If you download your manual from here: http://www.sharp.ca/manuals/, you will have exact instructions with illustrations. Thank you for using and rating FixYa!

Locate your manual at the link below - it is there and it is free!
http://www.sharp.ca/manuals/
Information is included as to what you need and how to replace the ribbon.

Please post back if you need more help, otherwise thank you for using and rating FixYa!

Locate your manual at the link below - it is there and it is free!
http://www.sharp.ca/manuals/
Do a reset (pressing the pictured button) and then reenter current information.

Please post back if you need more help, otherwise thank you for using and rating FixYa!

There is no date/time function on this model. Here is the link to the manual:

http://www.sharpusa.com/files/cal_man_EL2630P.pdf

Thanks for using and rating FixYa!

To set the date Step by step as follows: Set the lever to "RATE SET", Press the clock/calendar key once and the date will be diplayed, key in the info as follows: 1/1/08 would be keyed in as "1" "." "1" "." "2008", the display will show 1.1-2008 then press the clock/calendar key, the correct date will show up.

To set the time Step by step as follows: Set the lever to "RATE SET", Press the clock/calendar key twice and the time will be diplayed, key in the info as follows: 12:00pm would be keyed in as "12". "00", the display will show 12.00 then press the clock/calendar key, the correct date will show up. For 12:00am key in "0",".","00" as it expects to see 24hr time.

Call tech support! That's why these people get paid. Sites like this wouldn't need to exist if they did their jobs correctly!

http://www.sharpusa.com/files/cal_man_el2630P.pdf.

it needs fine adjustment to printer by service center.

Had the same problem. The tape does not feed through the top of the machine but instead through the slot at the back of the machine. It looks odd, but that is where it goes.

http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=662433c8924616b3264931192aff1225&q=Sharp+EL-2630PIII