Mad Catz Call of Duty Black Ops PrecisionAIM Controller - Answered Questions & Fixed issues

walmart has them or amazon mat be cheaper google search>>> try entering the search like this>>> charger for(your trio model number) amazon. if you dont have a credit card to make the purchase online do the search anyway because you should be able to get the model number for the charger you need,then you can go to a retail store like walmaert. walmart carries universal adapter chargers also. if they dont have what you need in store go to the help center and they will have it shipped to that store. Its much easier to do this online @ walmart.com then all you have to do is go to the store and pick the item up when it arives in a few days

I have had this problem before, it was the brake away conector not making a good connection. or try another brake away connector

You need to sync your controller with the ps3, put the USB dongle into one of the available slots on the ps3 - exactly where you would normally connect a wired controller on the front. Now switch on your ps3, the dongle will connect, now put your USB cable into the black ops controller and switch on - your 4 lights should be flashing on the controller. Now press connect on the USB dongle, your controller should now sync to the ps3 and hopefully will show as controller No 1. Remove the USB cable and play wireless.

Well... if the controller wont sync. You can try to plug it in to the charger if it is wireless.. But if that doesn't work the controller is broken..

sir good day there are two way on how to configure your wireless controller to your ps3 console.... the automatic pairing and a manual pairingfirst way an automatic pairing1.turn on your ps3..2.Connect the smaller end of the included USB cable to the PS3 controller.3.Connect the opposite end into either USB port on the front of the PS3. The pair light on the PS3 will flash. When it stabilizes, you can disconnect the USB cable and use the controller wirelessly.second way a manual pairing1.. turn your ps3..2.Connect the smaller end of the included USB cable to the PS3 controller.3.Connect the opposite end into either USB port on the front of the PS3. Press the "PS" button on the center of the PS3 controller. The pair light on the controller will flash. When it stabilizes, you can disconnect the USB cable and use the controller wirelessly.you can try that 2 way on how to configure your controller to your ps3 console if this help you please rate me thank you sir..

Try another controller that you know the vibration is working properly. If it works then you know the original controller is faulty. Those wireless controllers have a little motor that vibrates and they can go bad after alot of use, or if they get thrown around, etc.

Try reentering your billing info on your account. you may have to call sony to solve this.
best of luck!

Your problem isn't with the USB slot, it's the battery itself. Abuse to the battery (letting it die often, overcharging it for extended periods of time, etc.) can degrade the amount of power the battery can hold, along with the fact that lithium ion batteries eventually do lose their charge capacity after a certain amount of time. Your best bet is probably to just buy a new controller.

It sound like the controller is faulty. I suggest returning it. with PS3 controllers 3 party brands tend to be cheaply built. Its best to buy sony's controllers.

Mad Catz has been known to cause hardware problems with Sony units. However, it sounds like you are just having a sync problem. Try plugging in a USB Cable to the PS3, connecting it to the controller, then pressing the Home button.

Click here to get a walkthrough of this level

Hope this will help you

Regards

Tom

depends in what game

Hi, try pressing the pin for 30 seconds before releasing. Also, you can detach it from your xbox 360 for 5 minutes before re-attaching the device to your xbox. Otherwise, you might need to send the device in for repair through xbox or your local Geeksquad/bestbuy. Thank you.

infelizmente nem toda gera??o de consoles possui folhetos espec?ficos

You may need a different driver file. If the driver you are trying to use is 32 bit only, then you can not use it for 64 bit windows.

No. But... search for "peripheral adapters", because it used to be you couldn't use a keyboard and mouse with console games but now a few companies actually make hardware that allow you to plug in USB devices to use with PS/3-Xbox, etc. So, probably still no on PS/2 but maybe searching under ps2 hacks might find some ingenious hardware wizards?

You need to go to the Bluetooth settings on the PS3 and find the Pair Device option. Then you need to set the device you want to sync to broadcast its details - without knowing what device you want to sync, I can't help you there, and then the PS3 should then see your new dvice and sync once connected.

A common issue if that the PS3 is not set to pick up audio from your mic. Go to Settings, look for the Mic settings and check that the mic is indeed the input source selected. Also check that the battery is charged up enough, it is corectly paired - as per the instructions - or it is properly plugged in.

Madcatz have an excellent Customer service system, If you get in contact with them through their website, they are the best people to advise you on the best place to source a replacement.

The analog stick may have worn out. They are replaceable but might be easier to purchase a new / used controller.