Elite Csw200 Ul Swing Gate Operator Gate Opener Csw 200 - Answered Questions & Fixed issues
Elite roboswing R900 gate will not open, the unit produces clicking sound when I press remote control. What could be an issue?
I actually dont know the model.
Still i assume not opening is not moving at all? if you open the gate manually does it close?
The clicking sound tells me that at least one internal relay is beeing activated.
With that i would check the IR sensors first.
Then the motor conections and if there is voltage on them when you press the remote and the clicking happens.
The relay will close a circuit to activate the motor, (DANGER) since i dont know the circuit the relay could provide 12 volts up to mains voltage, if you dont have electrical/electronics knowledge dont do it, find a professional to do it for you.
If the motor gets power when the relay clicks could be the motor, motor capacitor (some motors work at mains AC voltage and use a big, normally white capacitor for startup) or the gear box, i've fixed a few garage door and gate systems just by dismantling the gear box, reajust and lubricating them.
Hope it helps
Regards
7/6/2019 1:31:19 PM •
Elite Home...
•
Answered
on Jul 06, 2019
•
603 views
My doorbell has gone quiet
It may have this silent option in either choice for volume or melody. My doorbell has numbered buttons that need to be pressed together with the button to open the door, in order to access these functions.
Another thought is that a battery needs to be replaced.
2/10/2024 4:57:34 AM •
Home Security
•
Answered
on Feb 10, 2024
•
21 views
How can I reset my floureon h 264?
Press the reset button: Using a small tool like a toothpick or paperclip, press and hold the reset button for a few seconds until the DVR resets. This will restore the DVR to its factory settings, including the default password
1/24/2024 10:45:58 PM •
Home Security
•
Answered
on Jan 24, 2024
•
820 views
No sound ..Floureon 4 channel NVR Camera system...Help
- Access Menu then go to Record. Choose Parameters then Record .
- Change the Camera to where your microphone is connected (e.g. channel 1).
- Change the Stream Type to Video and Audio.
- Put a check on the box beside Record Audio. If you cannot see it, click More Settings first.
- Click on Apply to save the settings.
1/8/2024 12:23:08 AM •
Home Security
•
Answered
on Jan 08, 2024
•
470 views
Not finding what you are looking for?