20 Most Recent Shop Vac 584-06-00 Canister Wet/Dry Vacuum - Page 5 Questions & Answers

Replace If you need further help, I’m available over the phone at https://www.6ya.com/expert/ron_a476a70a75690d24

Contact the company you placed the order with and explain it to them.

Is it new? You know if you don't keep your filter clean and hose cleared of debris they don't last long never run without a bag and or filter unless sucking liquids and liquid only

Best thing you can do is pull the other three off and throw em away or else glue them on the wheels being detachable means they get lost every time

Fill it up with hot hot hot water

possible a start/run capacitor failure take it to a vac shop for diagnosis and repair

Contact the manufacturer of device. They may help you. If not, make sure that current is reaching the on/off switch and that the power is reaching the motor - if power gets to motor and still nada then the issue is probably with the brushes not making proper contact with the commutator.

this video mite help you

doesnt really matter. however to be safe, I would wire Blue as the hot switch lead and brown to the neutral side.

Yes, in one way the suction would be higher, but there would now be an additional load on the motor. Also, it would have more suction, but less volume (air flow).

It is possible that the dust chute on the Kobalt saw is plugged, not allowing the vacuum to pick up the dust. Run a rod through the dust tube and see if that clears it.

Amazon is your best bet. Type in 120 volt rocker switch