20 Most Recent Hitachi 50GX49B 50" Rear Projection Television - Page 4 Questions & Answers

If the backlights stay on when the screen goes dark you could try a new t-con board. Not sure what to say about the horizontal lines, generally those come from a bad panel, that could be causing the screen to go dark as well

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. All the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check these sites too. http://remotesearch.blogspot.com/ https://elektrotricks.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops; as well as online shops. Visit the sites by Desktop computer and type in the brand name of your device in the search box at the right column. It will help you find the remote you have to buy. Mobille view has no search box.

Your LED backlights are bad, but Hitcahi parts can be hard to get sometimes

My Smart TV has that problem too , open it and repair led of LCD

What is the TV source or input? Unless the source is antenna or cable using the antenna in, the captions have to be disabled at the set-top box that is providing the signal. Some set-top boxes have a CC button on the remote but many have this hidden in the menu system. My IPTV box requires me to press Menu, choose the Settings menu and then enter a code provided by the provider. Once in the menu, the captions are enabled in the Hardware > Audio menu. Some satellite dish set top boxes have different access methods depending on the TV setup. If you have a master box that feeds two TVs, the setting menu to control the closed captions was only available on the TV closest to that box. (This was the case for a Dish receiver with a Single or Dual mode. In single mode, turning on the CC enabled the captions for both TVs. In dual mode, the two TVs could be tuned to different channels but only the TV nearest the set top box would display the closed captions if the feature was enabled. On that receiver, the closed captions were reached by pressing Menu. Then the captions options were under Properties > Closed Captions.) Please indicate what the TV source is for further information on where the sub-menu for the closed captions will be toggled on and off. I hope this helps. Cindy Wells

Help my closed caption option is not highlighted how can I remove CC from my Hitachi tv?

charger failure

buy a remote or fix the button

what are you using for the input? cable or antenna

probably a back light issue

If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ https://elektrotricks.blogspot.com/ faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the brand name of your set, in its search bar at the right side column, and press enter.

Try resetting the power by switching off the TV and then switch off the TV's power outlet and disconnect the TV's power cable from the outlet. Press and hold the TV's Power button for about 30 seconds to drain any residual power from the TV and then release the button. Turn on the TV in the normal manner and see if it turns on then afterwards.

If it works, put it on Facebook MarketPlace, free to collector. If it doesn't, you might be able to split it in the middle. https://www.cnet.com/reviews/hitachi-51swx20b-review/ ..

Replacement screen is required, so a new tv is probably cheaper.

You would need the remote control to select the MENU, then LANGUAGE.

Use code search on your Sudden Link URC to find something that woks. If a search through all codes stored in the URC fails, try a different one.

I am guessing it's an old(ish) TV. As a plasma the chances are that it is on it's way out. Please Try new cables (HDMI etc)

I don't know but it probably isn't much different to most other tv/remote combinations where commands are given by the remote and carried out by the brain in the tv. Start by pressing the Menu button and the main menu should appear onscreen and from there use the up, down, left and right buttons to navigate the main menu and the select button to select sub-menus and items from the menu(s) until you reach the section on channel search, installation, etc.

Did you know that this site https://fmovies.dev updates movies frequently and you can watch them for free?

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. View the site by desktop or web view on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.