20 Most Recent
Hitachi 61SDX01B 61" Rear Projection Television - Page 4 Questions & Answers
Horizontal Alignment
Well, you can force a reset on most TV's by unplugging the set from the
electricity for an least and hour and plugging it back into the outlet.
If not, need a brand and model. Sounds like a horizontal circuit problem.
Picture blanks out
Check your powercord. Unplug it overnight, then plug the power cord back in the morning. If that doesnt help, it means that something is going on with your set. Sometimes your power cord has shorted out and needs to be replaced. Generally you can find them under $100 depending upon your set...
No video, no audio, red light on in front of TV
Excellent visual acuity technique!! I try to teach that procedure.
IC F6629B is probably shorted and at least one other part will
be open, possibly a zener diode,a fuse,a resistor or combo.
The service diagram would help.Be sure to use OEM first quality
parts.Let me know if you need more help.
Hitachi 61SDX picture got dim shows Code 3
use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.
Crooked screen
do you mean the screen assembly itself is crooked or just the picture is crooked?
My big sreen tv
Do you have an electrmagnetic, enectrical, or magnet on, or near your T.V.?
Green spots
have you tried doing convergence from the menu? and them magic focus?
Red bow on top and bottom of 61dx01b
Convergence amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
http://www.hdtvoice.com/voice/showthread.php?t=28929
Or send to ptscorp.com
http://www.hdtvoice.com/voice/index.php?s=
good luck
please mark the post with a fixya
DARK PICTURE
skimo, service manual part number is "SM-PA0131" I doubt you can order the whole module anymore set is 2000 yr model, why do you want to order the whole module any way? Big bucks if it is available, BMW Rider
Red is distorted on upper left corner only
KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:
http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
Hitachi 61SDX01B
The problem is called green geometry.There is nothing wrong w/the green pix tube.It is critical to get the green geometry
accurate because the red and blue convergence overlays on
the green.If you have more than an alignment issue,that will need
repair before adjustments are attempted.
Hitachi 61SDX01B picture...
Sounds like the blue convergence circuit still not working.
Assuming both IC's are good, look for open soldered-in pico fuse.
Once bowing problem is solved,then convergence should adjust ok.
No audio, no video
Can you find out what Led is not on or which comes up and goes out? Most of these sets have convergence problems. Or Power Regulators.
Not finding what you are looking for?