20 Most Recent Hitachi 53FDX01B 53" Rear Projection Television Questions & Answers

Are you sure that you're pointing to the right source with the TV?

Hitachi 53FDX01B... | Answered on Nov 04, 2017

how many hours did your lamp work? perhaps the lamp need to be replaced.

if it was new lamp. the other two possible reason is light tunnel and ass relay.

no matter for what reason, you need to clean it for so old model tv

Hitachi 53FDX01B... | Answered on Oct 27, 2014

silly question but have you tried turning it on with the remote. if a tv has been turned off by remote and then power goes, turning it on by the tv switch will put the tv back in stand-by mode and you need to use remote.

just a suggestion.

Hitachi 53FDX01B... | Answered on Dec 13, 2013

This is a board level problem. If interested I can help you find the problem. You will either have to do some soldering or replace the board.

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

Hitachi 53FDX01B... | Answered on Dec 10, 2013

Your TV most likely a convergence failure. ( common problem )

Here are some of the most common symptoms and example photos of a convergence problem

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
Here are some photos of convergence problems.

Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.


You will need to replace the convergence chips and possibly some convergence resistors and pico fuses. Its a fairly easy DIY job or you can call in a pro. If you want to do the repair yourself check the site www.TvRepairKits.com. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, email/phone support, etc.

Hitachi 53FDX01B... | Answered on May 03, 2013

It could be a bad tuner in the set if you are using the Coax fitting for signal---if the rear audio/video inputs work with a cable box you could route signal into one of those instead of the tuner, bypass the issue.

Hitachi 53FDX01B... | Answered on Dec 19, 2012

Sounds like one or more of the projectors are blown as far as not having any picture.

Hitachi 53FDX01B... | Answered on Sep 12, 2012

It depends on set--there is a tech menu but can be hard and not for a novice as you make one wrong move and poof---how is raster out?

Hitachi 53FDX01B... | Answered on Apr 23, 2012

There are several ways---what is the set doing or not doing?

Hitachi 53FDX01B... | Answered on Apr 23, 2012

This is a covergence problem - 2 STK ic's need replacement along with possibly resistors and fuse

Hitachi 53FDX01B... | Answered on Mar 19, 2012

This is a common problem on this Hitachi model. You can get the parts and repair instructions from www.TvRepairKits.com. In most cases the TV will look real dim or have no video...but audio will work,

Hitachi 53FDX01B... | Answered on Mar 19, 2012

Not finding what you are looking for?
Hitachi 53FDX01B 53" Rear Projection Television Logo

138 questions posted

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76432 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6197 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hitachi Televison & Video

  • Hitachi Televison & Video

Most Popular Question

blue projector out place make

  • Televison & Video