20 Most Recent
Hitachi 60V710 60" Rear Projection HDTV Questions & Answers
Installed new lamp on my hitachi60v715 no picture or sound
Possible power supply or Lamp Ballast that has instantly blown a fuse.If no power or lights etc someone has to open and test voltages etc.If beyond you---have set taken to a shop---a house call is usually a waste of time and money in this situation.
Picture shows red
The model listed and some models just before it had a red or pink area oval in shape (can be almost any shape) that is caused by the Optical light engine (not cheap part) being damaged by the heat from the lamp, unless its under some warranty not cost effective to repair, last one I saw was over 600 wholesale just for the part.
How to turn off the SAP audio
There should be a button on your remote that says SAP. If not go into the user menu under audio settings and you will find it.
I changed the lamp almost
Get another Lamp Mats $99.00 1-800-628-1118
If you play this TV 24-7 you might need Lamp most lamps last between 5,000hrs of playing time,so when lamp has been played for 5,000hours then lamp goes bad.
My tv went out the other day completely but when i
Most likely bad lamp . Listen for a very slight buzz from the rear of tv at power up. IT will buzz several times before lamp light begins to blink. IF it does and pix does not light suspect lamp .. Part number Ux21513
My hitachi 60v710 wont turn on
Have you checked the main fuse to see if its blown? If thts blown its indicating a short if its not blown then cahnces are its the power supply causing the issue since no power indicator is lit. If you need further assistance let me know.
Screen red
Replace the drive power board hitachi part JP07451
Hitachi tv 60v710 turns off and on by its self
This problems it is related to the tv projection lamp.The tv projection lamp is inside the tv now.Been in the tv like a 1 1/2 or 2 years already?Tv is on and used it like 4 or 5 hours daily?Yes,than the tv projection lamp must be replaced should solved this problems.If the tv projection lamp already been replaced,than this problems are caused by the board that call the Ballast board.This Ballast board only job are to ignite the tv projection lamp only.
I have a red tint to my tv?
If you have RGB color settings adjust either green and blue higher or drop red lower, if this doesnt fix the problem than that means you have a problem with the colors/lights going out inside the TV
Not finding what you are looking for?