Canon FAX-L1000 Plain Paper Laser - Answered Questions & Fixed issues
Machine says there is a jam but I can't find
Open the rear cover so you can see the fuser unit. Somewhere in there you will find a paper scrap that has jammed a sensor arm. Use a torch to see it better. You may need to remove the fuser to see better.
Good luck
Printing an activity report
You should be able to get an activity report through the menu key. Push the menu key and scroll to reports Push ok/set key and scroll to actitvity report. Push set/ok key, one or the other, and an activity report should print out.
Canon fax-l1000 super g3 - is it possible to
"canon fax-l1000 super g3 - is it possible to operate this as a printer ?" (sic) I have researched and NO you cannot do that.
The best you could do would be to Fax images.documents from your PC to this machine, that would effectively work, you would need a modem in the PC though, otherwise it will work fine... BUT not as a printer, as such. But you would still have the ability to store and manipulate the documents IN the Fax when received, and may just work, well, but with limitations?
You would simply have to dial the fax from the PC and send it to it, then it would receive,,store and print out as you wished... should/could work just as well as a wifi printer?
Canon-l100-fax
Under user mode (MENU), there must be something like user sett.
SCan Platform
Lift the cover covering the recieving paper!If u look in here u will c a black handle with a greenish sticker on!Pull that down gently and push it up again untill it clips into place!Good Luck!
How do I change time and date please?
Press the dataregistration button.Select dataregistration.Scroll to usersettings press set.Scroll to date and time settings.Press the set button.Change the date and time and press set again.
Whats the scan platform
Scan platform in english is Were you shove the stuff to send ;) ie dirty feed roller, paper detect switch stuck or fragments of paper in original feeding paper path area or feeding stuff too thick or stiff, or if multi document issue it is the pad or roller that sits under the main feed roller...al this is nothiong to do with paper tray full of blanks it is the original feeler area on top..
Same error should occur doing local copy, check feed section/roller
Cheers hope that helps
Canon L100 fax machine
Just flip the little key cover open on the right hand side of the machine then press "Data Registration" then press "Set" then press "Set" again this will put you on time & date setting if you press "Set" a third time you can now change the settings using the arrows to step around and the numbers to change the settings. Just press "Set" when finished to save your setting & press "Stop" to exit programming mode.
I've got error message on fax-l100 canon
I have been having the same problem from my cannon l100.
If you switch off the fax machine for 30min the switch it back on again the fax will resets its self and will clear this error.
Martin
How do reset the time on Canon L100
Press Data Registration, select Timer settings, press set and you will see the time and calender. Enter each digit from left to right and then press set
How do I print a history report of faxes sent
Bt pressing the report button and then selecting "activity report" and then pressing the set button( in the center of the bullseye). a list of the last 40 transactioons will be printed out. Unfortunately none of the canon series units go any further back in history.
Not finding what you are looking for?