20 Most Recent
Bell & Howell FB Series 2000D Flatbed Scanner Questions & Answers
Bell & Howell 2000d fb adf tray will not go down after scanning
Hi,
It may be the clutch on the left side of the ADF. there are 2 there, one does the pick roller the other the tray. you could try swapping them over and see what happens.
also the sensor sometimes sees the underside of the top of the ADF and thinks its more paper, therefore keeping the tray up. try running a perment black pen around the inside of the hole in the tray where you put the paper to stop too much light getting in. (dont colour in the sensor itself though!)
How can I get my Bell & Howell 33SR Super 8 mm Movie Projector to read the audio strips on my movie film?
There are a few things that could be causing this issue. First, make sure that the audio volume on the projector is turned up all the way. If it is and there is still no sound, then the next thing to check is whether the audio strips on your film are damaged or corrupted in some way. If they appear to be fine, then the issue may be with the projector's sound system itself. In this case, you may need to take the projector to a qualified repair person for further diagnosis and possible repairs.
How do these points equate to money?
No money ever!
There is no payment made for answers on Fixya, points don't mean prizes, they are just for fun.
ADMIN Andrew
- Answers: 65,820 and not a penny per Answer.
Head over to
www.justanswer.com they pay lots of money because they charge for people to ask a question.
..
Not finding what you are looking for?