Top 20 Canon ImageRunner 1600 Copier Questions & Answers

You may download the Canon driver from http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner_1600_2000_2010f/imagerunner_1600#DriversAndSoftware

Normally ADFs have a top feed roller and a bottom feed which turns in the opposite direction . If the top feed roller is dirty / dusty , the original will not be pulled through , Also if the original is very thick ( > 130 140 gsm )

Error E000000-0001 this error?

click on your desktop .went to properties and then go to sub option .you can change the the light of your display

Hello,
for service manual, you can contact me on [email protected]

E001 - E003 such problems are mainly in the fixing assembly so you need to:-
1. check for the fuser lamp if it is not broken.(if broken replace)
2. the themistor if working properly.(if broken replace)
3. cables leading to the thermistor and the fuser lamp if working well.
5. change the fixing roller if it is finished.
6. reset the machine(in case of IR1600)

Hello,
the iR1600/2000 will show the message close printer door if the copier paper path door ( on left side of copier, beneath the bypass tray are paper path door in level with paper cass. ) isn't closed well. Open the door and close them with some "gentle" force. It is good idea first to push the paper path guide, before closing the door.

Hope that helps!

Canon IR 2000 copier is showing System Error E000 Hello, From my searches online the first course of action seems to be resetting the printer in service mode. I attempted to clear it in service mode: 1. Press ADDITIONAL FUNCTIONS, # 2. Go to #7 Printer and press OK 3. Go to #4 Printer Reset and press OK 4. Yes = ( > ) However, when I press the yes (>) nothing happens. Does anyone know why this is not working?

Hello keith,
The canon IR1600 is indeed a strong pony which I personally would never through away. But consider the fact that by law any manufacturer may choose (and usually will) to stop production of replacement parts after 7 years. So from that standpoint alone you are on thin ice. My answer (for what its worth) would be to be prepared for a new copier by doing the necessary research for a new one. That way you will be poised and prepared for the inevitable. That way when your pony lies down you have a game plan. Perhaps you could shelve it now and keep it as a backup while its still working. But you are indeed gambling on parts availabilty. I wish you well. :-) SPINAL

Hi,

You can get the top-panel buttons layout picture by clicking this link:

http://www.usa.canon.com/cpr/pdf/Brochures/iR1600_2000Brochure_0404.pdf

Thanks!

Hi,
do you mean complete drum unit?
If yes, you need to open front cover, realese the blue handle, remove the left sideway cover ( cover above the bypass tray, that have handle in the middle and goes out in left direction - TRANSFER COVER ), you will see two handles, left and right of the drum ( green roller ), grab them and pull the drum unit out.
Reinsert new drum unit, put back the transfer cover, lock the blue handle and close front cover.

Hope that helps!

Hi,
The paper jam could be in three places.
First:

Open the cover of fixing section, its above bypass, and check for jamed paper

Second:

Open the transfer cover, these cover has handle and it goes by pulling toward you, and check for jamed paper.

Third:

In hight of first paper cassette, on left sideway of copier, beaneath the bypass are small door, open it and check for paper jams. Be sure that you closed them properly because if they arent closed the check printer cover message will arrise.

Hope that helped

MY COPIER IR 1600.AFTER HAVING REPLACED PARTS DRUM UNIT +ORIGINAL TONER IMAGE PRINTING IS VERY POOR .WHY

it is very possible the dark line on your copies are being caused by the drum. it will all depend on how many copies are on it but without seeing one of the copies the best guess i can make is the drum.

E100 Quand le moteur de module de balayage est mis en marche, le signal d'entrée du BD n'arrive pas au cours d'une période spécifique. Quand le moteur de module de balayage est mis en marche, la rotation de moteur est trop rapide, et échouer pour atteindre une révolution spécifique à moins de sec 20 à la période de la décélération. Tandis que le moteur de module de balayage tourne à une vitesse spécifique, le signal d'entrée du BD le cycle n'est pas dans une marge spécifique (±2%) pour un équivalent de 10 millimètres (distance d'impression). Tandis que le moteur de module de balayage tourne à une vitesse spécifique, le signal d'entrée du BD le cycle n'est pas comme indiqué (±2%). Au cours de la période de WMUPR après que le commutateur électrique ait été mis en marche ou la couverture/couverture gauche a été ouverte/fermée, l'unité à tambour est absente. La cause possible le câblage est défectueuse (court-circuit, circuit ouvert). L'unité de module de balayage à laser est défectueuse. La carte de contrôleur de C.C est défectueuse. L'unité à tambour n'est pas installée. Remède 1) Unité à tambour L'unité à tambour est-elle installée dans l'ordinateur central ? NON : Installez l'unité à tambour. 2) Raccordement Est le raccordement du connecteur (J908) sur la détection du BD Carte, connecteur (J907) de l'unité de laser, et connecteur (J102) dessus la normale de carte de contrôleur de C.C ? NON : Corrigez le raccordement. 3) Unité de laser/module de balayage, carte de contrôleur de C.C Essai remplaçant l'unité de laser/module de balayage. Le défaut est-il corrigé ? OUI : Extrémité. NON : Remplacez la carte de contrôleur de C.C. Vous aurez besoin d'un manuel, vous pouvez obtenir un ici http://www.techmanualarchives.com/canon-ir1600_1610_2000_2010-service-amp-parts--manual-25158.html

When the scanner motor is started up, the BD input signal does not arrive
within a specific period of time.
When the scanner motor is started up, the motor rotation is too fast, and
fails to reach a specific revolution within 20 sec at time of deceleration.
While the scanner motor is rotating at a specific speed, the BD input signal
cycle is not within a specific range (±2%) for an equivalent of 10 mm (print
distance).
While the scanner motor is rotating at a specific speed, the BD input signal
cycle is not as indicated (±2%).
During the period after the power switch has been turned on or
the front cover/left cover has been opened/closed, the drum unit is absent.
Possible cause The wiring is faulty (short circuit, open circuit). The laser scanner unit is
faulty. The DC controller PCB is faulty. The drum unit is not installed

code asking? which?

error on fixing unit check the heater, thermistor,fuser film

It probably has a fragment of paper in it somewhere. Get a can of compressed air and blow it out. The open and close every door there is.