20 Most Recent Canon ImageRunner 1600 Copier Questions & Answers

Error E000000-0001 this error?

Canon... | Answered on Mar 25, 2014

Canon IR 2000 copier is showing System Error E000


From my searches online the first course of action seems to be resetting the printer in service mode.

I attempted to clear it in service mode:
2. Go to #7 Printer and press OK
3. Go to #4 Printer Reset and press OK
4. Yes = ( > )

However, when I press the yes (>) nothing happens.

Does anyone know why this is not working?

Canon... | Answered on Oct 30, 2013

Normally ADFs have a top feed roller and a bottom feed which turns in the opposite direction . If the top feed roller is dirty / dusty , the original will not be pulled through , Also if the original is very thick ( > 130 140 gsm )

Canon... | Answered on Dec 26, 2012


Canon... | Answered on Nov 21, 2012

The main thermistor reading does not reach 40°C 14 sec after the fixing
heater goes ON. (fixing low temperature error)

If E000 is indicated, the RAM on the image processor will
retain the error memory of the fixing assembly after the power switch has
been turned off an then on. Execute the following in service mode, and
turn off and then on the power switch to clear the memory: #7

Entering service mode: press "aditional function" and after "#(ID)"

Canon... | Answered on Jun 07, 2012

click on your desktop .went to properties and then go to sub option .you can change the the light of your display

Canon... | Answered on Jan 19, 2012

for service manual, you can contact me on [email protected]

Canon... | Answered on Aug 03, 2011

E001 - E003 such problems are mainly in the fixing assembly so you need to:-
1. check for the fuser lamp if it is not broken.(if broken replace)
2. the themistor if working properly.(if broken replace)
3. cables leading to the thermistor and the fuser lamp if working well.
5. change the fixing roller if it is finished.
6. reset the machine(in case of IR1600)

Canon... | Answered on Jul 13, 2011

the iR1600/2000 will show the message close printer door if the copier paper path door ( on left side of copier, beneath the bypass tray are paper path door in level with paper cass. ) isn't closed well. Open the door and close them with some "gentle" force. It is good idea first to push the paper path guide, before closing the door.

Hope that helps!

Canon... | Answered on Apr 23, 2011

Hello keith,
The canon IR1600 is indeed a strong pony which I personally would never through away. But consider the fact that by law any manufacturer may choose (and usually will) to stop production of replacement parts after 7 years. So from that standpoint alone you are on thin ice. My answer (for what its worth) would be to be prepared for a new copier by doing the necessary research for a new one. That way you will be poised and prepared for the inevitable. That way when your pony lies down you have a game plan. Perhaps you could shelve it now and keep it as a backup while its still working. But you are indeed gambling on parts availabilty. I wish you well. :-) SPINAL

Canon... | Answered on Mar 26, 2011

Not finding what you are looking for?
Office Equipment & Supplies Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2301 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

machine show error e000000 model ir2530

  • Office Equipment & Supplies