Canon imageRUNNER 8500 Copier - Answered Questions & Fixed issues
E000532-8001
i just replace Stapler shift motor GEAR..its work!!
12/12/2019 8:16:55 AM •
Canon...
•
Answered
on Dec 12, 2019
•
696 views
Error E354-0002 ir 8500
Error E354 in Canon iR 2016error e354 code appear when you replace PCB controller board.Please note. Before replace your PCB board with other one.Pull out a small (FRAM COUNTER) chip from your old PCB board you can found it right side of the PCB board near a battery cell the chip attached with screw open screw and pull it out and attached it with your new PCB board .install your PCB board in the machine and turn on power error e354 will go off.
5/5/2019 5:44:01 PM •
Canon...
•
Answered
on May 05, 2019
•
2,340 views
E602
Turn on holding down 1 and 9 keys. will go through a long complete format. If blocks do not fall down through screen left to right, HDD is completely gone.
8/31/2018 12:53:26 PM •
Canon...
•
Answered
on Aug 31, 2018
•
1,113 views
Ir 85 error code E000015-0000
hello
8500 IR copy machine
E00015 - 0000 errors.
Please guide me.
I also translated by the site you have to translate the sentences. So you have the goodness wording is easy.
Thanks
1/26/2015 10:01:55 AM •
Canon...
•
Answered
on Jan 26, 2015
•
581 views
E0061 canon 1100
Primary charge failure .broken wire or not seated or arching to the grid.
1/6/2015 7:04:59 AM •
Canon...
•
Answered
on Jan 06, 2015
•
54 views
How to fix Error Code E000732-001
Check the connection from Fiery to reader controller PCB, located on the left side of the machine, just beside the TCP /IP port connection.
8/10/2014 3:25:21 PM •
Canon...
•
Answered
on Aug 10, 2014
•
126 views
E315-000d how to solved
a fault is detected when encoding image data,
1.A chip failure is found in writing/reading/verifying the image data by using the register of encoding chip.
2.an error occurs when encoding image data
5/24/2014 9:01:11 AM •
Canon...
•
Answered
on May 24, 2014
•
208 views
E000100 0000
OK, but first try to clear the error under service mode, then replace fixing film assy, for EU 240V is FG6-6041.
To clear the error:
* 2 8 *
COPIER
FUNCTION
CLEAR
ERR
OK
Turn off and on ( main switch )
In case You Need Online Assistance Then follow Us For ON:
Canon Printer Support
2/10/2014 3:30:44 AM •
Canon...
•
Answered
on Feb 10, 2014
•
170 views
Where is laser shutter in ir 6000
Open the from door ....
see the top (center) side of the door there is a lever which push the laser shutter when u close the front door..
it may have break
1/1/2014 6:31:11 AM •
Canon...
•
Answered
on Jan 01, 2014
•
127 views
SHARP AR5618 COPIER ERROR CODE F2 64
You might Google the printer name and the error code. This is just a shot in the dark, but if there is no "reset" button, you might try unplugging it for a couple of minutes and it should reset itself to factory default settings. You will loose any settings and any work in progress. Just a guess. If you have an owners manual, I would check there to find how to solve the problem. There is normally a section that defines the error codes and gives solutions. You also might want to enter the "menu" if there is one, and discover whether you can solve the problem there. If you don't have an owner's manual, you might be able to find one at the printer manufacturer's website in the support section. Good luck.
11/11/2013 8:19:41 PM •
Canon...
•
Answered
on Nov 11, 2013
•
87 views
Cannon copier error
E000 is a fuser probleb.check the film/lamp continuty.for E000/1/2/5clear error in service mode as follows
press additonel function button and press2&8 at once and press additionel functionel button.select COPIER>FUNCTION>CLEAR>ERROR>OK.
for error E0005 replace the cleaning web and go to copier maode select COPIER>COUNTER>MISC>FIXWEB>press clear button on panel
2/28/2013 10:15:39 AM •
Canon...
•
Answered
on Feb 28, 2013
•
388 views
ERROR CODE 000005-0010
The error code E00005 means that the fuser cleaning web needs to be replaced and the web counter needs to be rest.
2/25/2013 9:28:18 AM •
Canon...
•
Answered
on Feb 25, 2013
•
149 views
Where can i find the serial number
You can find the serial # with pressing the meter counter, it should be on the bottom of the display or you can look on the back panel of the copier toward the bottom by the power cord. Good Luck
12/20/2012 2:50:09 AM •
Canon...
•
Answered
on Dec 20, 2012
•
40 views
Not finding what you are looking for?