20 Most Recent Canon imageRUNNER 7200 Copier - Page 3 Questions & Answers

ir 7200 eror code

The large tr/sep charger on the bed has three pin style contacts at its rear. When you raise the bed the three contacts lift and make contact with leaf springs that press against the charger pins delivery charge to the coronas. These leaf springs become bent back and need to be bent to original position in a triangular configuration.

The error code E00005 means that the fuser cleaning web needs to be replaced and the web counter needs to be rest.

serial &counter pcb dose not match

General condition1) Is the developing assembly locking plate mounted correctly?NO: Mount the plate correctly.General condition2) Is the shutter releasing member of the hopper mouth mounted correctlyto the developing assembly locking plate?NO: It is likely that the inside of the hopper is clogged with toner. Removeand then mount back the shutter releasing member to removethe clog, or replace the hopper unit.General condition, Developing assembly toner sensor (TS1)3) Is the developing assembly adequately provided with toner?YES: Check the developing assembly toner sensor.General condition, Hopper toner sensor (TS2)4) Is the hopper adequately provided with toner?NO: Check the hopper toner sensor.Hopper connector, Hopper supply motor (M10)5) Is the connection of the hopper connector normal?NO: Connect the connector securely.YES: Check the hopper supply motor.

First, is the toner bottle installed correctly??? I would check that again. The E0110-000 means that the laser unit is not working correctly, it is not a good error to have..... I would also check to make sure that all the doors and covers are closed correctly... Good Luck