Canon NP 7130 Black and White Copier - Answered Questions & Fixed issues


Hello,

Enter in service mode and do an cartridge adjustment. Maybe the toner is not uniformly distributed in cartridge. Also you can search on internet for service manual, this may help you a lot.

All the best !

Canon NP 7130... | Answered on Dec 03, 2017 | 111 views


Clean the rollers to stop miss feed and jamb.

Canon NP 7130... | Answered on Aug 09, 2016 | 125 views


urflower, try blowing unit out with compressed air.

Canon NP 7130... | Answered on Aug 09, 2016 | 221 views


Henry, try blowing it all out with compressed air to clear jamb.

Canon NP 7130... | Answered on Aug 09, 2016 | 341 views


Try removing the developer and reseat it.

Canon NP 7130... | Answered on Dec 16, 2015 | 116 views


I found a service manual for this model. If still need it let me know.

Canon NP 7130... | Answered on Nov 25, 2014 | 987 views


If its giving blank copies there was a ploblem with the laser shutter on these. If so it needs to be taken to authorized Canon repair facility for repair. Maybe still under warranty.

Canon NP 7130... | Answered on Sep 09, 2014 | 138 views


Try with WD 40. Roller must be hot

Canon NP 7130... | Answered on Sep 07, 2014 | 59 views


check cartridge setting how-
check all spring on correct place
check ITR spring touch point
check printer to cartridge touch point

Canon NP 7130... | Answered on Apr 01, 2014 | 239 views


Verify and clean the paper feed rollers and the paper fee drive mechanism.

Canon NP 7130... | Answered on Feb 17, 2013 | 66 views


Could be the drum or the fuser causing your problem. To replace drum you need to open the machine by hitting the gray release latch on eft ide of machine to clamshell it open. Inside you will see th toner cartridge/ dv unit on the far right and immediately to the eft of that is the drum unit. You need to release the dv unit by turning a lever before removing the drum unit. Should probably call a tech to do this for you so you dont scratch or damage the drum. Drum life on that model is about 30,000 prints. Whats the meter reading on that copier?

Canon NP 7130... | Answered on Jul 01, 2013 | 396 views


see the diagram and fix it.
5_10_2012_10_05_12_am.jpg

Canon NP 7130... | Answered on May 10, 2012 | 78 views


Can you please give more details.
If you moved the contrast slider darker and it still doesn't work, one solution is the end part has snapped below where the resistance dial is on circuit board. You'll have to unscrew panel to access circuit board. Not difficult but time consuming.
Please check that lamp is not dead.
Check all the coroner wires.
Is the supply of toner flowing or somewhere interrupted.
Take a piece of papaer and write all that's happening.
(for others to solve).
By doing this, you may stumble on something that's not working.
Keep in touch,

Fonda

Canon NP 7130... | Answered on Sep 20, 2011 | 51 views


This is the symbol for a paper jam. Clear the jam and if it continues you may have to clean the feed rollers, see if a piece of paper is in the paper path, or the guide just before the registration roller is flipped forward and needs to be rotated to the correct position.

Canon NP 7130... | Answered on Jun 27, 2011 | 29 views


Sounds as if the pressure spring that keeps the developer unit close to the drum is broken. Not worth fixing will cost around $250.

Canon NP 7130... | Answered on Jul 20, 2011 | 192 views


**** open the copier to see if the developer has fallen away from the drum unit or is the tab below where the toner is put in out of place. Sometimes, if out of place, when the copier closed shut the arm is moved to the right side of the post ( located on the lower half of the copier ) and move the developer away from the drum unit and produces light copiers or even blank copies.

Canon NP 7130... | Answered on Jun 15, 2011 | 92 views


This is trying to use the last of the toner in the tube. Try replacing the toner cartridge and should be well

Canon NP 7130... | Answered on Jun 14, 2011 | 54 views


I went to copy and it will not -- thought maybe I needed to replace toner -- cannot get it out. There was no indication that I need to replace toner. Seems something is out of line under the lid. I have moved and can't find my manual to check in the troubleshooting section. Can you help.

Canon NP 7130... | Answered on May 01, 2011 | 526 views


Unfairly, that feeder has it's own issuse's > it was a very bad design from Canon > It works really good or not at all.... There is a tech pub for a new drive motor for the doc feed belt & new sensors for the paper path..... It may also, be that it needs new adf feed rollers..... Did it work before you got it? If soo, I'd call the person you got it from and have them fix it. Or you can call a service person. The copier is a tad bit old....... Good Luck

Canon NP 7130... | Answered on Apr 28, 2011 | 158 views


Mr. Hertan,

Sounds like the middle roller may have ink on it.

You can either try to clean the rollers or replace the rollers.

Hopes this helps!

Canon NP 7130... | Answered on May 28, 2011 | 284 views

Not finding what you are looking for?
Canon NP 7130 Black and White Copier Logo

136 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2316 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6198 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...