Top 20 iRiver T20 MP3 Player Questions & Answers

The T20 has a 'built in' battery like most modern mobile phones have. Changing the battery isn't easy, it involves taking the player apart to access the battery. It may be easier to replace the whole MP3 for a new one.

ali

this is problem with your hardware.......

File check error ploblem

http://www.iriverinc.com/lounge/loungeView.asp?selectPart=03&findWord=&sno=702&page=1&cateCode=03

I solved the problem by deleting files in the trashbox on the laptop.

I had the same problem. I reinstall windows media player 11 and now the system recognize my iriver T20!!! When reinstalling WMP 11 i had T20 in the USB Port!
Angel Greece

you can change battery and/or upgrade hard drive (if changing hard drive, save the software to pc then copy to new hard drive)
how to replace battery / hard drive
check and follow this link http://www.youtube.com/watch?v=6HOnpHSgMvw

if you dont have tools http://www.ipods99.com/Default.asp?Redirected=Y

When it is plugged into pc, that is all you will see. If this is happening while disconnected from pc, then reset the player to get past this stage.

It sounds like the USB plug-in on the player itself could be damaged. I would call the manufacturer to see if you are in warranty - if the volume+/force recognition method does not work, then we are in a bind. You could try uninstalling/reinstalling the software, but I doubt that it will work, because none of the other pc's recognized it - double check the manual to see if there is a hold/lock switch - if it is pressed, then no pc will recognize it.

Reset the player, upgrade the firmware.

Make sure you have the latest version of Windows Media Player. XP has all the right drivers but the iRiver needs to synchronise with Media Player inorder to transfer music onto the player using the sync function. Get Media Player 10 or higher then plug the iRiver into the computer.

XP should display it as a drive in "My Computer". It may require a firmware upgrade. This can be downloaded from T20 Firmware Upgrade V1.71

No Guarantees....Hope this helps.

http://www.iriver.com/product/p_detail.asp?pidx=71

Make sure you have the latest version of Windows Media Player. XP has all the right drivers but the iRiver needs to synchronise with Media Player inorder to transfer music onto the player using the sync function. Get Media Player 10 or higher then plug the iRiver into the computer.

my iriver t20 shows on display "file check error" and all my folder are disappeared.please help me to solve the problem. thanks for your assistant.

All the answers/drivers/manuals for the iRiver T20 can be found here:
http://www.iriver.com/product/p_detail.asp?pidx=71

Hey, that means switch the hold button to the other side, this is preventing you right now from wasting your batt. when your not using it and hit a button on mistake.

Try this: disconnect the player from the computer, turn it off Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

All the info/manuals/drivers/upgrades for the iRiver T20 can be found here:
http://www.iriver.com/product/p_detail.asp?pidx=71

All the info/manuals/drivers/upgrades for the iRiver T20 can be found here:
http://www.iriver.com/product/p_detail.asp?pidx=71