Nerf N-Strike Longshot CS-6 Blaster - Answered Questions & Fixed issues


Take the rear bolt cover off ( 2 screws) . Reach inside with your finger and try spinning the spring. For some reason the spring will eventually move to a position that when compacted will bind with the bolt pass through hole.

Nerf N-Strike... | Answered on Dec 27, 2010 | 1,441 views


is It electric? if it is then you should look for some corrosion on the motherboard.

Nerf Toys | Answered on Jul 07, 2020 | 132 views


Because I'm unsure what version of the Rival Nemesis you have, I'd contact Hasbro directly and live chat or email their customer support team for troubleshooting advice. I've included the link.

Hope this helps!

Nerf Toys | Answered on Apr 19, 2020 | 141 views


Is there a Nerf round stuck in the mechanism

Nerf Toys | Answered on May 25, 2019 | 167 views


Did you verify that the Nerf could handle this type of power prior to using? Hopefully you didn’t fry anything.


If you’ve found this helpful, please click the green “helpful” icon. If you have 20 seconds please leave a few words as a review or recommendation! Also, follow me for more answers to everyday issues, I’m all for saving you money and making the most of your time! Thanks and have a great day!

Nerf Toys | Answered on Mar 15, 2019 | 134 views


https://m.youtube.com/watch?v=spaayNFppaQ

Nerf Toys | Answered on Feb 14, 2016 | 85 views


1. Get a ruler
2. Push the ruler down the barrel so the end is near the bottom of the disc
3. Jiggle the ruler from left to right
4. Shoot the gun/Press the disc eject switch

Nerf Toys | Answered on Dec 21, 2013 | 742 views


unscrew the entier gun... all nerf guns are screwed together. you can practically cut the gun in half by unscrewing it. just make sure to put everything back how you found it. good luck to you.

Nerf Toys | Answered on Mar 29, 2011 | 467 views


I had the same problem with two guns out of the box. Turned out that the dividers in the battery tray kept the batteries from touching each other on some brands of batteries. Remove the dividers and should work. You can verify this by measuring the voltage on the two terminals of the battery pack.

Nerf Toys | Answered on Nov 08, 2013 | 2,718 views


Probably stolen property, the person you bought it from would know the password, ask them for it or return it to the shop you purchased it from for a full refund.

sale of goods act: item must be fit for use, no password is not fit for use!

Toys | Answered on Jan 02, 2021 | 20 views


The required, (but not included), 4 "C" size batteries fit inside the coal car. One "AA" size battery goes in the pump car, (which has a lantern light, besides the pumping soldier), and 3 "AA" size batteries are needed for the remote control. There are separate switches on the engine, the coal car and the pump car to activate all the features of the train. The directions are explained on the remote control devise.

Toys | Answered on Dec 30, 2020 | 18 views


They stop working because they are made in China for $5. They are not normally repairable apart from changing batteries. If you want to get inside, it will be through the base. Probably screws hidden under felt.

https://www.ebay.ca/b/Mr-Christmas-Carousel/908/bn_55191126

..

Toys | Answered 2 days ago | 22 views


you dont give up do you marvy. we all know jhons your wife

Toys | Answered on Dec 27, 2020 | 17 views


That appears to be part of a toy train set so I moved it from the Motorcycles category :>)

Turn it on? It is a Caboose, the rear carriage. No turning it on, that's the train at the other end. It is just 'rolling stock'.

https://www.google.com/search?q=1986+bright+line+Gold+Rush

..

Toys | Answered on Dec 15, 2020 | 14 views


There is nothing online saying how to repair this, so I'll guess.

The little washer will fit anyone of those metal spindles. It allows something to spin without binding in the black housing.My guess is the tall one or the one to the left.

The knot on the end of the string should fit into a slot on that tall spindle and the string should sit between those indentations.

The should be tension on the tall roller, so you will need to pre-tension it. You can pull the plastic string guide grommet up to do it. Then push the grommet back in. Put the housing back on top.

Toys | Answered on Dec 15, 2020 | 13 views


Fisher-Price would be a possible source.

Toys | Answered on Dec 14, 2020 | 165 views


Try contacting Winfun to inquire.

Toys | Answered on Dec 14, 2020 | 158 views

Not finding what you are looking for?
Nerf N-Strike Longshot CS-6 Blaster Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Nerf Toys Experts

MODERATOR Canada
MODERATOR Canada

Level 3 Expert

35932 Answers

MODERATOR WORLD

Level 3 Expert

37627 Answers

Alyssa DeWolfe
Alyssa DeWolfe

Level 1 Expert

27 Answers

Are you a Nerf Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...