20 Most Recent Nerf N-Strike Longshot CS-6 Blaster - Page 2 Questions & Answers


That appears to be part of a toy train set so I moved it from the Motorcycles category :>)

Turn it on? It is a Caboose, the rear carriage. No turning it on, that's the train at the other end. It is just 'rolling stock'.

https://www.google.com/search?q=1986+bright+line+Gold+Rush

..

Toys | Answered on Dec 15, 2020


There is nothing online saying how to repair this, so I'll guess.

The little washer will fit anyone of those metal spindles. It allows something to spin without binding in the black housing.My guess is the tall one or the one to the left.

The knot on the end of the string should fit into a slot on that tall spindle and the string should sit between those indentations.

The should be tension on the tall roller, so you will need to pre-tension it. You can pull the plastic string guide grommet up to do it. Then push the grommet back in. Put the housing back on top.

Toys | Answered on Dec 15, 2020


Fisher-Price would be a possible source.

Toys | Answered on Dec 14, 2020


Try contacting Winfun to inquire.

Toys | Answered on Dec 14, 2020


cool and sometimes new celebrities appear here with the ability to download in mp4 https://www.ruvideos.net/search/celebrity/29905293-11b2-401f-85fd-c8460f6d88d7.jpg

Toys | Answered on Dec 13, 2020


Any luck finding out?

Toys | Answered on Dec 08, 2020


Hola Alberto Ruben o Marcelo Pablo, Por favor estoy necesitando el manual mykit 150 o 200, por favor, podrian indicarme de donde bajarlo o enviarmelo en formato digital? Muchas Gracias
[email protected]

Toys | Answered on Dec 06, 2020


Did you check the metal pin and spring terminals the batteries sit between? If a battery powered toy is stored with the batteries still in the terminals can corrode and block the electrical current from the batteries. Try cleaning the terminals with a cotton bud and Very Fine sand paper. A cardboard nail file works well for this.

Toys | Answered on Dec 01, 2020


Reference: Paisley Electronic Push Code Safe
Item # 5661462
Purchased at Justice. May be one of the following design/colors: 1. Pink and black 2. neon green 3. tye-dye (all in zebra pattern, I believe)

To gain access to safe without code proceed with the following simple instructions:

Use a screw driver to access batteries on the bottom of the safe. Remove all three AA batteries.
WAIT AT LEAST TEN SECONDS before reinserting betteries to functional position. Replace screw. Key in default passcode "0000#" Safe will now be unlocked and upon opening you can reset passcode. Hold down the "*" and when voice prompted to "key in passcode" enter new 4 digit code followed by the # sign... HOLD "*" until completed code with "#" You will hear the voice command, "enter passcode" after each digit entered. [Press & hold "*" (1234) press "#" release "*"] Close safe and new passcode should be set and work properly. If not, enter default "0000#" and try to reset once again.

Toys | Answered on Nov 28, 2020


Disconnect the electrical connector that joins the arches. Unscrew the half of the arch that holds the batteries. Check the red lead from the battery compartment. Mine had two problems - it was almost disconnected from the battery, and had another disconnect in the middle. Twist the wires together at both fault points and tape (electrical tape) or solder. I soldered and my Learning Home is now working perfectly.

--gdipersio

Toys | Answered on Nov 16, 2020


There are tutorials and video's on YouTube and on Goggle then on how to make your own decorations for birthdays and for Christmas and Easter and Halloween and for Valentines day too.

Toys | Answered on Nov 11, 2020


Put the crank handle in the down position and then use the arrows on the gears to guide you. The two gears that hold the two spirals should be closest to you. Make the two arrows on the gears point directly at each other(keeping the crank in the down position). The third gear's arrow (furthest from you) should point directly at you bisecting an imaginary line formed by the other two arrows pointing at each other. The idea is to get the spirals lined up so they create a channel for a ball to fit in.

Toys | Answered on Oct 04, 2020


https://directbrown.weebly.com/dreamsky-alarm-clock-radio-user-manual-ds201.html#dreamsky-alarm-clock-radio-user-manual-ds201

Toys | Answered on Sep 29, 2020

Not finding what you are looking for?
Nerf N-Strike Longshot CS-6 Blaster Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Nerf Toys Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

35843 Answers

WATCHING YOU

Level 3 Expert

37603 Answers

Alyssa DeWolfe
Alyssa DeWolfe

Level 1 Expert

27 Answers

Are you a Nerf Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Nerf Toys

  • Nerf Toys

Most Popular Question

kid opened nerf

  • Toys
Loading...