Casio Sea Pathfinder SPS2011V Wrist Watch - Page 6 - Answered Questions & Fixed issues

This link should help you. http://support.casio.com/en/manual/manualsearch.php?cid=009&MODULE=5475

where ever you want look up for a watch repair or just about any store that sells watches replaces batteries

In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed. 2. Hold down A for about two seconds until the alarm time starts to flash. This is the setting mode. 3. Press C to move the flashing between the hour and minute settings. 4. While a setting is flashing, use D (+) and B (-) to change it.

• When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press A to exit the setting mode. To test the alarm In the Alarm Mode, hold down D to sound the alarm. To turn an alarm and the Hourly Time Signal on and off 1. In the Alarm Mode, use D to select an alarm or the Hourly Time Signal.

• When the alarm you want or the Hourly Time Signal is displayed, press A to toggle it between on and off
• The alarm on indicator (when any alarm is on), snooze alarm indicator (when the snooze alarm is on), and the Hourly Time Signal on indicator (when the Hourly Time Signal is on) are shown on the display in all modes.

To stop the alarm Press any button.

ebay, craigslist?

The hour hand will advance when the minute hand makes a full rotation

If that's from the very start when you bought it, it might a factory defect and you cannot do anything about it. That is already considered a junk. Buy another one.

Anything more detailed about the replacement of batteries? Also, need to know placement of springs. Found a third tiny spring on my screwdriver magnetic) which may or may not be part of the watch… sigh!
Thanks!

https://support.casio.com/storage/en/manual/pdf/EN/009/qw2515.pdf https://support.casio.com/storage/en/manual/pdf/EN/009/qw2515.pdf

just pull the crown out and turn the hands until the time shown is correct ,then press it back in

when you buy casio it comes with operating manuals you just have to set it "hourly beep" = and a symbol like that will appear. =

Possible manual - free online. http://casiowatchparts.com/manuals-2/3768-instruction/ Casio 3768Instruction Online Official PDF Guide

https://support.casio.com/en/manual/manuallist.php?cid=009 Enter the 4 digit caliber number on the back of your watch

Hold A (about 10 o'clock position) button down until display flashes then use D button (about 5 o'clock position) to cycle through the Time Zones until you get to the one you want

Nice question

https://support.casio.com/storage/en/manual/pdf/EN/009/qw3000.pdf https://support.casio.com/storage/en/manual/pdf/EN/009/qw3000.pdf

https://support.casio.com/en/manual/manuallist.php?cid=009 Timepieces Watches

Please provide 4 digit number on the back of the watch to find a manual: http://support.casio.com/en/manual/manuallist.php?cid=009 Timepieces Watches Manuals CASIO

Possible instructions for sale. Please use the Comment menu to let us know if it is applicable or not. Thank you. https://www.amazon.com/Song-Book-CTK-518-Casio-Instructions/dp/B003JWRUJ0 Song Book CTK 518 Casio Instructions and notes in 14 languages Paperback...

saving the settings by pressing the mode button after each setting is probably what you missed

from the user manual press the button closest to the seconds display on watch . bottom right button in normal time display to switch between am / pm time or 24 hundred military time. http://mygshock.com/casio-manual/548/ enlarge the internet browser display to read which button to press to change the time or date. press button B top left button to go into change mode press button C bottom left button to move to seconds or minutes or hours . press button A bottom right button to advance the time press button b top left button to go back to normal time display