20 Most Recent JVC DRMH20 DVD Recorder - Page 8 Questions & Answers

If the remote is sending a signal and the unit isn't responding, the remote may need a reboot. If someone accidentally pressed multiple buttons at the same time, that can cause the remote to send multiple signals at the same time and that can cause the unit not to respond because it doesn't recognize the signal being sent.

The reboot is easy. All you do is remove the batteries and then press all of the buttons on the remote one at a time while they are out. After you've done that, you can put the batteries back in and usually that fixes the issue.

JVC Televison &... | Answered on May 09, 2019

Hello Terence, for what you are saying, that you have 12.6 volts in leg 4 (Supply) of STR G6551, according to the data sheet, it is low, it starts working from 14.4 volts, typical 16 volts and maximum 17, 6 volts
you would have to check the values of the power resistances of leg 4, also the capacitors and the optocoupler
I send you link to the JVC THS 55 DVD service manual and the STR G6551 data sheet
I hope you manage to make your JVC THS 55 DVD work
Greetings Franco Dosil

Hola Terence, por lo que comentas, que tienes 12,6 volts en la pata 4 (Supply) del STR G6551, seg?n la hoja de datos, es bajo, arranca a trabajar desde los 14,4 volts, t?pico 16 volts y m?ximo 17,6 volts
Tendr?as que revisar los valores de las resistencias de alimentaci?n de la pata 4, tambi?n los capacitores y el opto acoplador
Te env?o link del manual de servicio del JVC THS 55 DVD y la hoja de datos del STR G6551
Espero que logres hacer funcionar a tu JVC THS 55 DVD
Saludos Franco Dosil



JVC Televison &... | Answered on May 04, 2019

Hello Richard, it would be good to specify the model of your JVC TV and comment, what equipment is connected, if you have any energy filter, all this is to try to find a possible solution to the failure you write
I wait your answer
Greetings Franco Dosil

Hola Richard, seria bueno que especifiques el modelo de tu televisor JVC y comentes, a que equipos esta conectado, si tienes alg?n filtro de energ?a, todo esto es para tratar de encontrar una soluci?n posible a la falla que escribes
Espero tu respuesta
Saludos Franco Dosil

JVC Televison &... | Answered on May 04, 2019

Hola Xavier, por lo que describes puedes tener un problema en el cable HDMI-HDMI, que utilizas, probar?a con otro cable, si asi to tienes resultado, probar?a el aparato que deseas conectar, en otro televisor, para descartar que este funcione bien y por ultimo, cambia lo que conectas en el HDMI 1 y pruebas si funciona, si no es asi prueba en otra entrada HDMI; del televisor, si solo tiene una y no logras resultados positivos, lamento decirte que tienes un problema en la placa principal, de ultimo si puedes, prueba ingresarlo por audio y video (fichas Amarilla- Video, Blanca y Roja-Audio)
o por Video Componentes( fichas Verde+Azul+Roja Video, Blanca y Roja-Audio )
Espero que puedas resolver tu inquietud
Saludos Franco Dosil

Hi Xavier, for what you describe you may have a problem with the HDMI-HDMI cable, which you use, I would try another cable, if that is the case, I would test the device you want to connect, on another TV, to rule out that it works well and finally, change what you connect in the HDMI 1 and tests if it works, if not, test in another HDMI input; of the television, if you only have one and you do not achieve positive results, I regret to tell you that you have a problem on the main board, last if you can, try to enter it by audio and video (Yellow-Video, White and Red-Audio)
or by Video Components (Green + Blue + Red Video, White and Red-Audio tabs)
I hope you can solve your concern
Greetings Franco Dosil

JVC Televison &... | Answered on May 03, 2019

Hello, for what you describe your JVC, it requires a service of mechaning, replacement of belts and rubber pulleys, plus all the cleanings of old lubricants
If you have technical knowledge, I send you the link to download the service manual
If you are not looking for a specialized technical service
I hope you can listen again and rewind the tapes in your JVC
Greetings Franco Dosil

Hola, por lo que describes tu JVC, requiere de un service de mec?nica, reemplazo de correas y poleas de goma, mas todas las limpiezas de lubricantes viejos
Si tienes conocimientos t?cnicos, te env?o el link para que descargues el manual de servicio
Sino busca un servicio t?cnico especializado
Espero puedas volver a escuchar y rebobinar las cintas en tu JVC
Saludos Franco Dosil


JVC Televison &... | Answered on Apr 30, 2019

Turn off the timer in menu set

JVC Televison &... | Answered on Apr 23, 2019

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Unlock procedure and to override the password lock to many popular brand TVs are given. To get more details, refer its user manual.

JVC Televison &... | Answered on Apr 20, 2019

There's a remote on eBay right now for $15 ~ buy it!


Hope this helps!

JVC Televison &... | Answered on Apr 09, 2019

Use code search on the URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

JVC Televison &... | Answered on Apr 06, 2019

This problem is in the screen.
The flats cables on the screen have a bad contact try to open and fix the bad contact .

JVC Televison &... | Answered on Apr 04, 2019

Not finding what you are looking for?
JVC DRMH20 DVD Recorder Logo

Popular Tags

32 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

JVC Televison & Video

  • JVC Televison & Video

Most Popular Question

no power all fuse t2al blown up

  • Televison & Video