20 Most Recent
- Page 2 Questions & Answers
Connectivity problem. Without knowing your models and their available channels etc., it's very difficult to advise you exactly.
Broadly though ...... you need to get the input signal routing sorted.
Plug your aerial into the Freeview box. Make a connection from its RF out, (beside the aerial 'in' socket) to the aerial 'in' socket on the JVC. Run yet another co-axial connection from the JVC RF 'out' to the television.
Now - connect a scart lead between the JVC and the TV. Power off the freeview. Switch your TV to accept A/V - to show the JVC on screen. Read/go through the 'Set up' procedure on the JVC to scan in the available broadcast channels. When done - connect using a scart between the Freeview box and the JVC. This will be located on either the L1 or L2 channel selection.
IF as it seems you are using the freeview to watch all your programmes - and record in then you are simply watching and recording 'live' change the Freeview programme and the JVC gets that same one arriving in (and sending to the TV)
Unless you need to record Freeview only output - always record from the aerial input. You select via the television remote (and 'TV' selected) and the appropriate channel.
Complex to explain - hope it helps. The one thing to remember - is to make one set of changes at a time - check the result is okay, before moving to the next.
JVC DRMH20 DVD...
on Jan 28, 2008
How do I turn on my JVC LT-40N555 TV when screen is black and red light is not on
Typically the red light on lots of appliances (TV'S in particular) indicate power is available to the appliance, is this so on your tv?
If so the first thing you should focus on is resetting the breaker associated with that power outlet or changing outlets. If there is a reset button on the tv then push it. After you do this we can go on to the next steps- it sounds like the set is not getting any power so let make sure then get back to me. Good Luck and Thanks
JVC Televison &...
on May 20, 2020
Not finding what you are looking for?