If the problem is with its picture linearity [Vertical], you have to enter its service mode to correct it. It is best to replace all the electrolytic capacitors [5 or 6] of it, at the vertical scan output circuit, before doing any adjustments, because, if there is any of it is damaged, the fault to this kind can occur too. After replacing it, just switch ON the set, and check the picture linearity is correct. If not, enter its service mode, and adjust the vertical picture linearity. If you wish to get some details, check the site linked here.Pull up older posts.

Read full answer

JVC AV-27D302... • Answered on Dec 07, 2013

1 Answer

The just stopes the volume and it does not save

Check and replace the main system control memory IC. It is faulty.

Read full answer

JVC AV-27D302... • Answered on Oct 17, 2013

1 Answer

Black box is taking up bottom half of the Screen

Check your closed-caption settings and make sure it's turned off. You'll probably find it's now set to text mode. The set is blanking out the part of the screen where text would be displayed, but there isn't any.

Read full answer

JVC AV-27D302... • Answered on Aug 26, 2013

2 Answers

Remote codes for UNIVERSAL DT008 REMOTE Tv IS A

Be the first to answer

JVC AV-27D302... • Posted on Aug 23, 2013

0 Answers

How to hook up antenna to jvc tv

you have to put an antenna adapter

Read full answer

JVC AV-27D302... • Answered on Mar 31, 2013

1 Answer

What is its code

0060 0026 0197 0069 0247 0923 0012 0065 0067 0141

Read full answer

JVC AV-27D302... • Answered on Oct 26, 2012

1 Answer

I want to know its code

Universal remote codes for JVC are: 0060 0026 0197 0069 0247 0923 0012 0065 0067 0141

Read full answer

JVC AV-27D302... • Answered on Oct 26, 2012

1 Answer

WHAT IS CHANNEL GUARD

Download the user manual to this TV by internet. It has all details. Click here and try to download it.

Read full answer

JVC AV-27D302... • Answered on Oct 11, 2012

1 Answer

Universal dt008 REMOTE CODE AND INSTRUCTIONS

Direct Code Entry

Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Codes for JVC TV are: 0060 0026 0197 0069 0247 0923 0012 0065 0067 0141

Read full answer

JVC AV-27D302... • Answered on Aug 20, 2012

1 Answer