JVC HR-A592U S-VHS VCR - Answered Questions & Fixed issues

The brand of remote will determine what website you need to go to for the answer.

It goes by satelite time no matter what you personally set it to.

I'm sorry for the difficulties you're experiencing in resetting the Timer on the VCR. Please unplug the unit from wall outlet for more than 5 minutes to perform a power resetting and it will resolve the issue.

Thanks for understanding. Please let me know if you require any clarifications.

Try website like Remotes.com to buy the VCR original remote.This site sell all DVD/VCR,DVD, VCR,TV and all electronics original and clone compatible remotes.

unplug vcr for about 30 sec. and plug back in. this worked for me and my jvc vcr

good luck, roadstarman

universal one. standard one costs around 8-10 usd. you can order it online or buy it in every bigger shop, or every computer shop

I need the codes for a remote control

check out the main fuse inside the power supply.
AJ

You can open the expert profile and use ask me option, or post a new comment into your thread.

Here is the link to your profile page: http://www.fixya.com/users/mjc8456

If no menu, unplug, and let it set a few minutes. Replug and the on-screen menu should appear. Reset the set-up (date, etc). I had the same experience as one of the other posters with JVC customer service telling me the menu button on the remote was malfunctioning, and I should purchase a new remote from them.
After you input your programming, be sure to hit the Timer button on your remote. If you want to change tapes or playback, you will need to hit the Timer button again (take it off Timer) for access to your VCR. Be sure to reset it to Timer afterwards, or you will not be able to record.

How can t I get the pop up screen when I apply menu. When I press menu nothing appends. I have the illico box for HD and had the videotron tech install it so I can recorded but since the menu does not work I cannot set the time or anything else on it.

Thanks

Gilles T Garceau

Here's the manual.

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Heres the instruction manual, not sure hoe to myself but if this doesnt help ill read it and try to figure it out too :D

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Its not fully ejecting the tape. Return it or get it repaired, you can try to do it yourself but isn't recommended.

Youre in luck go to www.vancebaldwin.com and either enter your model number or the part number X-076N0ES010 and get the remote for $22.00

Unpluggung and re-connecting worked for me too

Hi , to cancel just push the record push button .

You'll need to unplug the unit, wait a minute and then plug it back in. This happens to me on occasion.

Most VCRs have a simple slide switch, usually on the back of the unit. Just slide the switch towards "4"

hi sir
the speed in EP is differ from sp ,EP it is much slow then all quality would be less cause you are using less magnetic particles on the tape so here are many reasons for bad recording
first may be you have to clean video heads
or ,you have to clean the path of the tape in the recorder there are some metal guides that turnes with the tape to get it rounds the heads they may be dirty
or clean the capstain pinch roller and its metal roller that makes it run ( the capstain roller )
or you should have new heasd drum sir
regards