Thomas and Friends Sodor Dairy Cars from Thomas The Tank Engine Wooden Train Set - Free 2 Pieces of Track and Free Toby Train - Page 5 - Answered Questions & Fixed issues

Take it to a local model model shop. They will usually know someone that does electronic toy repairs. https://www.google.com/search?q=Life+size+Gemma+doesn%27t+sing+anymore ..

That appears to be part of a toy train set so I moved it from the Motorcycles category :>) Turn it on? It is a Caboose, the rear carriage. No turning it on, that's the train at the other end. It is just 'rolling stock'. https://www.google.com/search?q=1986+bright+line+Gold+Rush ..

Question edited for clarity, threw in a few Capital Letters. Question moved from Cars and Trucks (real ones) https://www.google.com/search?q=power+wheels+rock+and+roll%2C+rear+wheels ..

Hi, you can attempt a power cycle to see if the issue will stop. Then, please check for any switches on the santa that control language choice and choose specifically english (as opposed to both). Otherwise, you might have to reach out to Svius on there website in order to arrange for a replacement or repair. Thank you.

The basic sand toys of bucket and spade are sometimes the best, but if you are looking for something a bit different, you can read this article on the Parents website that suggests some of the best beach toys for kids.

http://www.parents.com/fun/toys/kid-toys/beach-and-sand-toys/

Question moved from Cars and Trucks to Toys category. A wiring diagram doesn't exist. You could take it to a model shop, or buy a second one as a template. $25 https://www.google.com/search?q=1992+Greatland+Train+Wiring+diagram ..

I don't think it will, but you only need to cut one wire. That reduces the risk of the two wires shorting and damaging something. Tape off the wire so it won't accidentally contact anything. You might first want to check the manual to see if there is a way to disable the smoke generator without cutting anything - maybe there's a hidden switch that does the job.

Question edited for clarity and typo. Contact a local model shop. They will know someone that does model repairs. https://www.google.com/search?q=model+shop+near+me ..

The batteries may be enough to make the whistle blow but not enough for the wheels. The other possibility is that the carbon brush on the motor need cleaning and resetting. If you happened to see Roger's idea about using cooking oil on it, please don't. I will be deleting his post shortly. I have told him time and time again not to suggest cooking oil for lubrication of metal parts. There are troubleshooting videos in this link. If you can fix it, take into a local model shop, NOT GeekSquad as also suggested by Roger or they are likely to break it. https://www.google.com/search?q=Echo+Classic+Train+doesn%27t+move ..

Did you get an answer to your question about the Ferris wheel?

Check his clothes and boots for the missing gears. If they aren't there, you either get a new one or find a local model maker to help. They are all made in China at lowest price point for retail, purchase for $5, sell for $99.95..

http://www.wowwee.com/static/support/roboraptor/manuals/Roboraptor_Manual.pdf

Gaurang

Hi, If you've done a full swap on a majority of parts associated with your device, I would attempt a factory reset if possible and then use a Home Depot technician or Geeksquad technician to help you if the factory reset fails to help with the volume issue. Thank you.

Download Link: http://www.repair-guidebook.com/bobcat-753-skid-steer-loader-service-repair-manual-download

Question edited for clarity and written English. No there is no wiring schematic available. You could ask Lemax direct, but you should be able to see where the wire was attached. https://www.google.com/search?q=spooky+town+witches+lair+wiring+diagram ..

The shows a mains adapter and nothing about batteries. There is a link to Gemmy at the bottom. https://www.google.com/search?q=Gemma+5+ft.+Dancing+Singing+skeleton+replace+battery ..

on a tablet it is normally screen damage. Or this If the LeapPad does not complete the shutdown process and the white dot remains on the screen for more than ten seconds, complete the shut down by pressing and holding the power button on the LeapPad for ten seconds. This will fully power the LeapPad down, and it will start up normally next time you power it on.

LeapPad will not completely power down, white dot remains ...

..

There are several toy ATMs on the market, none of them identifiable by manufacturer online. :( BUT, you MAY have an option, as some toy ATMs allow for you to access them if you lose the card by using ANY credit card, and then your toy's PIN. Sadly, these are not meant as anything more than a toy, so replacement parts are not available. They are a non-renewable item, and if they break, or lose parts, they become refuse. Such is the life of mass produced toys from china. I hope the credit card thing works for you. Otherwise, you will have to break the toy to extract your funds. ~M

take it to a different large chain store like the W world... and exchange it for a different one. Of course the store has to sell it there before you can exchange it. worst comes to worst, I always have good luck calling the company and complaining. I have gotten free vouchers for new items that way.

Does anyone have a copy of the Madeline vintage doll house instructions??