20 Most Recent
JVC MX-KA3 CD Shelf System - Page 9 Questions & Answers
JVC RX-702B only detects linear PCM, not multi-channel digital
Like most receivers it will probably have settings for the sound output. Once you find this it will be just a matter of switching the system over to Dolby signals. If you find that it already set like that, try switching the DVD or blue ray player you are using or whatever source, using their sound settings on them. So that both devices are sending and detecting Dolby signals.
If both devices are set correctly then there probably will be a fault in the decoder of the JVC.
12/9/2017 12:55:38 AM •
JVC Audio...
•
Answered
on Dec 09, 2017
AV Receiver - Sound not getting through to speakers.
Before you do anything else, make sure no tiny strands of speaker wire from one channel haven't got in contact with the speaker wires from the other channel. Check first on the back of the receiver, then at the back of each speaker.This can cause the circuit breakers for that channel to shut it off when there is audio. It can also blow the fuses inside your receiver. It only takes one tiny strand to blow your amp.
9/24/2017 3:14:36 PM •
JVC Audio...
•
Answered
on Sep 24, 2017
Not finding what you are looking for?