20 Most Recent Mintek MDP-1770 Portable DVD Player - Page 6 Questions & Answers

Hi again if u have the tv set to hdmi input & nothing is working maybe u could try another cable or try plugging into another tv good luck...,. There should b a ( DVI ) SOCKET ON THE BACK TO PLUG YOURE COMPUTER LEAD IN ....

Not sure due to lack of information to go on I. think you need a tv coaxial female to f plug male adapter really depends on the TV cable cord what is the gender of the end of the cable if it is coaxial male then the adapter needs a female coxial if the tv has a female socket hole then the f type part of adapter needs to be a male. The tv manual may shed some more info on the type of RF antenna coaxial connector. it uses. RCA can be confused as av is to do with with hooking up a Video recorder with Video output being the yellow plug and audio with Red and white plugs. http://www.4cabling.com.au/rca-audio-and-video-cable-10m.html?gclid=COyD3pvqpsUCFYqCvQodP38A1Q#.VUa9JZM_xhI I think you need a RF coaxial adapter rather than AV RCA if you are connecting tv to a tv antenna or tv antenna splitter device. there is a RCA standard that has adapter like below link http://www.radioparts.com.au/product/30255099/pa5099-%27f%27-plug-to-rca-socket-adaptor#.VUa7uJM_xhI again gender types are needed to be considered before deciding if correct type of adapter.. You could research the rca rf standard to see if it is used in your country. My country uses Pal coaxial standard. http://www.ebay.com.au/itm/like/271684688400?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=107&chn=ps .

TV or Monitor? Monitors do not have tuners for cable wire.

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time.

The Mintek DTV-260 only has a NTSC (analog) tuner. You will need to connect your RCA antenna to a digital to analog converter box to watch TV over the air. Then connect the output of the converter box to your TV. The common converter boxes are limited to SD output. You might be able to find an HD converter box online. (With the standard converter box, the available outputs are coaxial and composite video.) The DTV-260 has a composite video port; alternatively set the TV to channel 3 or 4 and use the coaxial (RF) input on the TV. There may be a low-power station that still broadcasts in analog. However these are rare. You will need to switch from CATV to OTA (Air) to check for one of these stations. Analog Cable has different parameters than scanning for over the air signals. I hope this helps. Cindy Wells

Replace the flat ribbon cable that connects the optical pickup unit to main board first. It this do not help you, replace optical pickup unit.

Check its optical pickup unit. Replace it if a cleaning do not help you. To clean the optical lens, insert a lens cleaning disc into the device, and play it at least two times. Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as Service help to electronic home entertainement equipments.

Pull up older posts. You can get all details.

Site is listed in Google, and you can locate it either at the bottom part of first search page, or at the top of second page.

Click on associated ads too. Sometimes, it might help you.