Top 20
JVC RX-1028V Receiver - Page 2 Questions & Answers
My disctray is stuck. Howcan I open it?
There are a few potential solutions you can try if your disc tray is stuck:
- Check the power cord and ensure it is securely plugged into the outlet and the back of the device. If the device has a power switch, make sure it is turned on.
- Check the disc inside the tray to make sure it is not blocking the tray from opening. If there is a disc, try gently pushing the tray in and then pulling it out again to see if it will release.
- If the above steps do not work, try pressing and holding the "eject" button on the device for a few seconds. This may release the tray.
- If the tray is still stuck, try pressing and holding the "eject" button while unplugging the device from the power outlet. Wait a few seconds, then plug the device back in and try the "eject" button again.
12/15/2022 1:35:47 PM •
JVC Audio...
•
108 views • 0 helpful votes
Jvc ks-bta100 can i set call volume to it's own level
The JVC KS-BTA100 is a Bluetooth adapter that allows you to stream audio from your phone to your car stereo. It is possible to change the volume level of calls on the KS-BTA100, but the exact method may vary depending on the specific version of the device and the version of firmware it is running.
Here are a few things to try:
- Check the manual: Check the user manual for the JVC KS-BTA100 to see if there is any information about adjusting the volume level of calls.
- Check the device settings: Some versions of the KS-BTA100 have settings that allow you to adjust the volume level of calls. Check the settings menu of the device to see if there is a way to adjust the volume level of calls.
- Check the phone settings: Some smartphones have settings that allow you to adjust the volume level of calls. Check the settings menu of your phone to see if there is a way to adjust the volume level of calls.
- Check for updates: Check if there is any firmware update available for your KS-BTA100, it may have the feature you're looking for.
12/23/2022 6:06:24 PM •
JVC Audio...
•
71 views • 1 helpful votes
JVC RX-558V no sound at all
First of all, check if there is any audio device connected to the receiver. If there is, check if the audio device is turned on and the volume is correctly set.If the receiver does not have any audio device connected, then you should connect the antenna and try again.
11/4/2022 11:07:21 PM •
JVC Audio...
•
150 views • 0 helpful votes
JVC RX-6018V not working with TV
Hi,
please double check all connections from your jvc device to your tv. You might have misplaced some plugs. You can use the both tv and jvc manual to ensure that you've made every necessary connection. Also, you can check that your remote doesn't currently have mute activated and the volume is turned up on the tv. You might have to turn the jvc volume up directly from the device as the remote might not be able to do this.
Thank you.
10/26/2022 12:20:58 AM •
JVC Audio...
•
118 views • 0 helpful votes
Users manual JVC RX-707v stereo receiver
take the PDF to any town copy centers
the will print it for you
or buy your own printer or as a buddy to barrow one.
this post is how to print a PDF
google that see 100million answers, all correct.
for 4 decades now.
8/29/2022 3:19:56 PM •
JVC Audio...
•
131 views • 1 helpful votes
After system reset, how do I preset stations on my ux-d327b jvc hi-fi
You can only preset stations one by one. First, you can do a full scan for all stations in range. Press and hold the Stop button on the unit. Press Play/Pause to start the scan. (There are alternate methods using the remote control. See page 17 of the manual.) Press Fast Forward or Fast Reverse on the unit to navigate through the stations that have signal.
To set a preset, tune in a station using the Tune+/Tune- buttons on the remote or Fast Forward/Fast Reverse. Then press and hold Prog/Preset on the remote. When you see ##Empty or a preset number, use Tune+/Tune- to select one of the 20 preset storage numbers. Press OK/Play/Pause to save the preset. (If using the buttons on the unit, press Fast Forward/Fast Reverse to select a preset location. Press Play/Pause to save. You will see Stored on the display in either case, if you successfully saved the frequency to the location.
ManualsLib has the manual for the JVC UX-S327B here:
https://www.manualslib.com/manual/1939546/Jvc-Ux-D327b.html#product-UX-D327B . See page 18 for presetting stations.
I hope this helps.
Cindy Wells
6/5/2022 4:42:23 PM •
JVC Audio...
•
251 views • 0 helpful votes
How do I remove the platter on a JVC L-F130
Most platters and turntables use a friction fitting. Basically It's pushed on. The centre spindle has a slight taper on it so the platter grips tighter the farther down you push it. Lift the lid out of the way, off altogether if you can. Get a helper to hold down the body of the turntable with one hand and push their thumb of the other hand down on the tip of centre spindle. While they do this you grip the outside edges of the platter on opposite sides and firmly pull UP. **Caution** The platter might let go suddenly so warn your helper AND be ready for it.
4/26/2022 4:31:17 PM •
JVC Audio...
•
75 views • 0 helpful votes
Not finding what you are looking for?