20 Most Recent
JVC TD-W118 Single Cassette Deck - Page 2 Questions & Answers
How can I fix the auto mute on my jvc E100SL?
If your JVC E100SL receiver is showing an "Auto Mute" message and you are unable to perform a factory reset successfully, there are a few troubleshooting steps you can try to resolve the issue:
- Check speaker connections: Ensure that all speaker wires are securely connected to the receiver and the speakers. Loose or disconnected speaker wires can trigger the auto mute feature as a safety measure.
- Check the speaker impedance: Verify that the speakers you are using with the receiver have the correct impedance (measured in ohms) that matches the receiver's specifications. Using speakers with incompatible impedance can trigger auto mute.
- Inspect the wiring: Check all audio input and output connections to make sure they are properly connected and not damaged. A faulty or damaged cable can cause the auto mute feature to activate.
- Unplug and reset: Turn off the receiver and unplug it from the power source for about 10-15 minutes. This will allow the receiver to reset, which might resolve any temporary glitches or errors causing the auto mute.
- Check for overheating: Overheating can trigger safety features like auto mute. Ensure that the receiver has adequate ventilation and is not placed in a confined space. Clean any dust or debris from the vents to improve airflow.
- Perform a hard reset: If the factory reset procedure is not working, you can try performing a hard reset. To do this, locate the reset button on the receiver (usually a small pinhole) and use a paperclip or a similar tool to press and hold the button for about 10-15 seconds. This should reset the receiver to its default settings.
- Update firmware (if applicable): Check the JVC website or contact their support to see if there are any firmware updates available for your receiver. Updating the firmware can sometimes resolve software-related issues.
- Seek professional assistance: If none of the above steps resolve the auto mute issue, it's best to contact JVC customer support or take the receiver to a qualified audio equipment repair technician. They will have the expertise and diagnostic tools to diagnose and fix the problem accurately.
Always be cautious when attempting to troubleshoot or repair electronic equipment. If you are not confident with electronic repairs, it's best to seek help from a professional to avoid causing further damage to the receiver or risk of injury.
7/25/2023 4:54:21 PM •
JVC Audio...
•
Answered
on Jul 25, 2023
Jvc ks-bta100 can i set call volume to it's own level
The JVC KS-BTA100 is a Bluetooth adapter that allows you to stream audio from your phone to your car stereo. It is possible to change the volume level of calls on the KS-BTA100, but the exact method may vary depending on the specific version of the device and the version of firmware it is running.
Here are a few things to try:
- Check the manual: Check the user manual for the JVC KS-BTA100 to see if there is any information about adjusting the volume level of calls.
- Check the device settings: Some versions of the KS-BTA100 have settings that allow you to adjust the volume level of calls. Check the settings menu of the device to see if there is a way to adjust the volume level of calls.
- Check the phone settings: Some smartphones have settings that allow you to adjust the volume level of calls. Check the settings menu of your phone to see if there is a way to adjust the volume level of calls.
- Check for updates: Check if there is any firmware update available for your KS-BTA100, it may have the feature you're looking for.
1/14/2023 11:03:36 PM •
JVC Audio...
•
Answered
on Jan 14, 2023
My disctray is stuck. Howcan I open it?
There are a few potential solutions you can try if your disc tray is stuck:
- Check the power cord and ensure it is securely plugged into the outlet and the back of the device. If the device has a power switch, make sure it is turned on.
- Check the disc inside the tray to make sure it is not blocking the tray from opening. If there is a disc, try gently pushing the tray in and then pulling it out again to see if it will release.
- If the above steps do not work, try pressing and holding the "eject" button on the device for a few seconds. This may release the tray.
- If the tray is still stuck, try pressing and holding the "eject" button while unplugging the device from the power outlet. Wait a few seconds, then plug the device back in and try the "eject" button again.
1/8/2023 6:09:19 AM •
JVC Audio...
•
Answered
on Jan 08, 2023
Unmuting JVC RX-554v receiver.
You can search for the remote on-line, the manual should give you a model number of the remote. So you can search for that. If it is expensive or not unavailable, then get a good quality universal one. Preferably one that searches for the device itself, which will save you messing around looking for the codes.
11/23/2022 7:59:49 PM •
JVC Audio...
•
Answered
on Nov 23, 2022
Not finding what you are looking for?