Top 20 LG 50PX5D 50 in. Plasma HDTV Questions & Answers

Plasma tv's don't last long....buy a led tv.

the power supply has failed

Hello that's a 2010 model set. It sounds like the y sustain board is failing (part # EBR61855101), it usually starts with bad connections on it. A screen shot would be helpful...thanks

First suspect is the power supply board.

you can change this on your remote , goto their website and look there also ck youtube,

Short circuited component/s at its sustain board. Contact any service technician. Electro help

look up serivce codes for the TV they use the 4 colour buttons to allow to service mode so once you get back to service mode with a good remote then set it to default factory if you can or atleast then you can cancel out any changes etc to get back in look for the service manual for its modek and work from there

Bad memory or bad buffers for the screen. Unfortunately, this is not cost effective to fix. The cheaper option is to buy a new LCD tv than getting the dinosaur fixed, if you can even find someone who'll fix it.

0286,022,0290,0263. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

Must be an Y-sus drive board issue replacing it will most likely fix the problem

Do the TVs still work ok? it could be that they have just become dusty. take the back off them and give them a good dusting out. try not to use brushes and rather use compressed air. you can get this from most computer shops.

If you can't switch it on, with the manis switch on the TV, you have to fear the worst. Looks like the power supply died. But in modern TV's lost of things can cause a complete shut down. Don't forget to check if the mains is working, the mains cable is in and the plugs are will in their connections.

Fault with main board. Shorted component/s. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

Is sound still on if yes its A Y-sus problem if not probably psu and Y-sus error

Open tv and look at power supply board. ...look for bulged caps...also controller boards could be blown if caps e blown

Go to menu, find picture ( settings) and make screen brighter. I hope this works for you, it has for me. all the best kolbrun

setting up roku it seems to be stuck on select a language

You may need a new power supply for that unit. Does it show any lights or anything?

Factory reset if you can display the menu, otherwise needs a repair

Here is the answer to that:http://blog.coppelltvrepair.com/2010/10/vertical-or-horizontal-color-lines-in.html